User Controls
Posts by Narc
-
2019-01-16 at 10 AM UTC in Simple timer for IEDs
-
2019-01-16 at 9:58 AM UTC in Simple timer for IEDs
-
2019-01-16 at 9:51 AM UTC in Counterfeit MoneyYou forgot the greasy hair
Anyway we know he's a total bacon, so most likely he looks like one.
. -
2019-01-16 at 9:44 AM UTC in CandyRein is fat and ugly ...but at least she's got the guts to post pics of herself...
-
2019-01-16 at 9:41 AM UTC in Counterfeit Money
-
2019-01-16 at 9:39 AM UTC in The Retarded Thread: Sploo Needs Attention
-
2019-01-16 at 9:34 AM UTC in Risir and CandyRein have not been posting much lately...If you'd have stopped for a moment to find out how old candy was before making that dumb comment you wouldn't be looking like the retard you are right now.
But then you're one of those ignorant idiots that thinks everyone else is stupid and never stops for a moment to consider the fact that maybe its you thats wrong all the time.
You're too wrapped up in being a fat poof all the time. You're a fucking joke pal, its impossible to ever take you seriously. I'm literally in stitches typing this at you, like most of the time when I'm replying to you.
. -
2019-01-16 at 9:24 AM UTC in Risir and CandyRein have not been posting much lately...
Originally posted by GGG Well in most cases, being older gives you a massive mental advantage over a younger person. Those who seek out boys/girls that are underage are most often manipulative. For this reason, you should have the ethical values to avoid taking advantage of people who are not yet old enough to be considered responsible.
Although to be fair, Narc doesn't have much of an advantage over anyone.
Says the idiot who for some reason thinks candy is an underage child.
lol
. -
2019-01-16 at 4:16 AM UTC in Simple timer for IEDsI'd blow you up you fat fucker.
. -
2019-01-16 at 4:12 AM UTC in Simple timer for IEDs
Originally posted by We'reAllBrownNosers I had this idea for a buoancy timer. Back on totse, some people came up with the idea to use two close pins held apart, with wires attached, so that when they closed, the wires would connect, completing a circuit and heating a light bulb filament which ignites an explosive charge. When held open, the close pin is frozen in water. So once the water melts, the pin closes and the explosion occurs. Problem is that this is not very predictable especially in cold weather. Using a similar concept, a hole can be poked in one container(container A), with a small weight in it, so that once the container that container A is sitting in (container B) is filled with a fluid, container A gradually sinks, allowing wires to touch and complete a circuit. This can be used with a liquid that doesn't easily freeze, so it's much less affected by temperature. Very precise and predictable timing. Easy to put together. Yep, some people will say 'omgzbongoz bombs r bad' and it's a "kewl" idea. That's why I'm posting it here. Where all the other shitty messed up ideas go.
EDIT: container B can obviously also be the only one with a hole in it. That may work better. Pull a thumb tack out of it or something and pour water or whatever liquid up to a certain level. Thumb tack is likely to take forever though unless there's sufficient weight in container A to force water out. You'll have to adjust it to get the right timing.
Myself and other totse members had tried the ice timer. Works quite well. I scared the shit out of my brother once by attaching one to some fireworks, left it in the barbeque pit and forgot it was there. He took a nap in the hammock and it went off while he was asleep. He was convinced I was outside sneaking around messing with him and it was dark. I explained to him I had forgotten about it. It was a hilarious coincidence… As someone pointed out, you'll need more power for the water's conductivity to be a problem. Much bigger battery required. Use a 9 volt and you're good, but if it's cold enough outside, it may take forever to melt, and then possibly drain the battery, so you'll need a fully charged battery.
It's not dangerous at all with the ice timer, so long as you're using the right filament. You'll need quite a bit more juice going through it in order to get the filament hot enough to ignite a pyrotechnic mix or primary. You can test this out by not attaching any pyrotechnic mix or primary, and put your fingers on the filament. You won't feel any noticeable heat. Try a thermometer if you want to be sure. Brake light bulb + 9 volt battery. Gun powder for example, is going to take quite a bit more heat than anything you'd get with that small amount of current flowing through the ice. Certain primary explosives are quite heat sensitive compared to others, but even those aren't going to be a problem. If you're really paranoid, attach a length of fuse to the filament, and first check with thermometer.
Everyone already knows about those methods though. The purpose of this is just mostly something new, which doesn't leave as much evidence.
If I was to do the ice method I would probably get a pair of forceps and have two points that you could attach to the ends that make a connection when the forceps closed. Then disconnect them and place the forceps in open position with the handles sitting in water in the freezer so you freeze the handles inside a big ice cube. Then when they are in the ice reattach the contacts and wire them up and put a tight elastic band around the prongs so that they close once the ice melts away. You could place one of those pocket hand warmers below the ice to speed up and ensure it melts. Obvs run tests to get the right amount of ice for the time needed. This way you should be able to keep any water away from the contacts and any of the electric circuit altogether if designed well.
But I still think using metal wire to hold the forceps apart which is then submerged into hydrochloric acid would be better way to go. Using set thickness of wire would give you a fairly good set time. Also the concentration of acid would affect the to.e taken to dissolve the wire. With the right testing you should get it accurate to within a minute or so and be able to set it anywhere from a few minutes to half an hour or more.
. -
2019-01-16 at 3:55 AM UTC in Simple timer for IEDs
-
2019-01-16 at 2:39 AM UTC in Risir and CandyRein have not been posting much lately...
-
2019-01-16 at 2:36 AM UTC in Risir and CandyRein have not been posting much lately...
Originally posted by mmQ Because you're stupid. Fuck off.
You were the 71st post..
Yeah but no
https://niggasin.space/post/635017
. -
2019-01-16 at 2:32 AM UTC in Risir and CandyRein have not been posting much lately...
-
2019-01-16 at 2:30 AM UTC in Counterfeit Money
-
2019-01-16 at 12:43 AM UTC in Counterfeit Money
Originally posted by vindicktive vinny the thing that you said happened at the drug store only happen to people who look like a crook.
your right i dont know how you look, but the woman at the drug store knew how you look,
and what she did indicated that you looked like a crook.
and maybe still is.
Yeah I'd say I probably do.
What of it?
. -
2019-01-16 at 12:28 AM UTC in How to prevent winter dandruff?
-
2019-01-16 at 12:25 AM UTC in How to prevent winter dandruff?I always use head and shoulders and can't remember the last time I got dandruff.
You should only wash your hair a couple of times a week at most tho.
. -
2019-01-16 at 12:20 AM UTC in Risir and CandyRein have not been posting much lately...
-
2019-01-16 at 12:18 AM UTC in Simple timer for IEDsWho mentioned anything about movies faggot?
Anyway I'll leave this here, I'm sure you can figure out the rest.
.
