User Controls
anyone ever try to weld or tig steel to copper?
-
2018-07-18 at 1:22 PM UTC
-
2018-07-18 at 1:45 PM UTCif you payed attention ude realize i spell words wrong i ntentionally just to fuk wit inept fuckwads liuke urself,, I even go so far as to spell the same words wrong in as many different ways as humanly possible,, sometimes in the same sentence.
-
2018-07-18 at 1:50 PM UTCI'd check that out...you may have a learning disorder.
-
2018-07-18 at 2:01 PM UTC
Originally posted by POLECAT if you payed attention ude realize i spell words wrong i ntentionally just to fuk wit inept fuckwads liuke urself,, I even go so far as to spell the same words wrong in as many different ways as humanly possible,, sometimes in the same sentence.
I went so far as to go to my basement to retrieve the exact information you needed to help you with your problem.
I further looked things up on the net to find you a good deal on exactly what you needed.
This is the thanks I get?
It will be one cold day in hell before this inept fuckwad ever goes out of his way to help you again.
Some fucking people! SMH -
2018-07-21 at 12:41 PM UTCPoley ... are you copper or steel?
-
2018-07-21 at 1:02 PM UTC
Originally posted by stl1 I just went down into my basement to get more specific for you.
Silvaloy 45% silver solder roll (1/16" wire, 3 oz.) NOT 15% stick silver solder.
Stay-Silv flux (Silvaloy recommends using Ultra-Flux)
I found a combination package of 1 oz. 45% silver solder with flux for $31.98 w/ free shipping.
Ships from and sold by Torch And Welding Supply.
Harris Solder Kit 4531 & SSWF7 - Safety-Silv 45% 1/16 Solder 1 Ounce w/ Flux
Get $10 off instantly: Pay $21.98 upon approval for the Amazon Prime Store Card.
• 6.5 oz Flux
• 1 Troy Once (31 g) Solder
• 45% Silver
• 30% Copper
• 25% Zinc
I have always used an oxy-acetylene torch with this product. May not work properly with propane or Mapp gas. Not sure. Stick 15% will work with Mapp gas, just not real well.
Good luck!
Originally posted by stl1 I went so far as to go to my basement to retrieve the exact information you needed to help you with your problem.
I further looked things up on the net to find you a good deal on exactly what you needed.
This is the thanks I get?
It will be one cold day in hell before this inept fuckwad ever goes out of his way to help you again.
Some fucking people! SMH
your suggestion was way out of my budget at this time -
2018-07-21 at 1:51 PM UTCPoley,
You don't have $55.00 to your name?
May I offer you a loan?
What are friends for?The following users say it would be alright if the author of this post didn't die in a fire! -
2018-07-21 at 2:21 PM UTC$55?
Apparently he doesn't even have $31.98. -
2018-07-21 at 3:10 PM UTCDagnab you, Benny.
I was trying to get in Poles pants. lol -
2018-07-21 at 4:42 PM UTCI would need several rolls of silver as the pipes are 1 inch and it would take over two rolls of solder to do one pipe not to mention its going to have fire right on the soldering joints for up to 24 hrs at a time and I doubt the silver solder would hold up to that abuse,, and no I dont have 55 dollars as the mushrooms kinda shit the bed on me about 10 days ago.
at this point I have 40 bucks till I return the tool after putting the ball joints in my truck,, then I'll have enough to inspect my truck and renew my DL and if I'm lucky I'll have my ins payment before the 30th.
I am poor at this time,, I'm ok with that cuz I am a survivor and I can feed off the land and wont need coffee till the 10th next month. -
2018-07-22 at 1:46 PM UTCPole's limit for a first date is 1 Happy Meal and only with homosexuals who have no teeth.
-
2018-07-22 at 2 PM UTC
Originally posted by POLECAT I would need several rolls of silver as the pipes are 1 inch and it would take over two rolls of solder to do one pipe not to mention its going to have fire right on the soldering joints for up to 24 hrs at a time and I doubt the silver solder would hold up to that abuse,, and no I dont have 55 dollars as the mushrooms kinda shit the bed on me about 10 days ago.
at this point I have 40 bucks till I return the tool after putting the ball joints in my truck,, then I'll have enough to inspect my truck and renew my DL and if I'm lucky I'll have my ins payment before the 30th.
I am poor at this time,, I'm ok with that cuz I am a survivor and I can feed off the land and wont need coffee till the 10th next month.
you said you were going to have your neighbor weld it. anything ever come of that? -
2018-07-22 at 3 PM UTChe was busy doing other things,, I'm not gonna hound him to help, I'm bus replacing the ball joints on my truck this weekend anyway, I went back to wood fire for my steam till I work out the issues on the new steamer
-
2018-07-22 at 3:19 PM UTC
Originally posted by POLECAT he was busy doing other things,, I'm not gonna hound him to help, I'm bus replacing the ball joints on my truck this weekend anyway, I went back to wood fire for my steam till I work out the issues on the new steamer
bummer
i need to do my ball joints too. fuck that project -
2018-07-22 at 5:25 PM UTCconjoined at the balls.
-
2018-07-22 at 7:05 PM UTC
Originally posted by infinityshock bummer
i need to do my ball joints too. fuck that project
it wasnt as bad as I expected,, did the first side yesterday afternoon and started the last side this am and did it in about an hr n a half not counting breaks to let my big fat god damn gut rest as it was getting the crap squished out of it when bending over. also took the spacers out so I could run non dooley rims on the truck,, it rides a lot smoother without the dools on the back plus I had aluminum rims and new tires sitting here waiting for a truck to put em on and it look funny with two kinds of rims on it -
2018-07-22 at 7:52 PM UTC
Originally posted by POLECAT it wasnt as bad as I expected,, did the first side yesterday afternoon and started the last side this am and did it in about an hr n a half not counting breaks to let my big fat god damn gut rest as it was getting the crap squished out of it when bending over. also took the spacers out so I could run non dooley rims on the truck,, it rides a lot smoother without the dools on the back plus I had aluminum rims and new tires sitting here waiting for a truck to put em on and it look funny with two kinds of rims on it
i have an F250 so mine is going to be a pain in the dick. my 'regular' socket set only went to 1" so i had to get the larger socket set.
the good thing about duallie rear ends is theyre a helluva lot more stable hauling 'stuff' and are less susceptible to spinning tires. -
2018-07-22 at 8:03 PM UTCI rented a ball joint puller from the parts store and Iv been collecting tools for decades, I did break a 1 1/8 wrench and a 1 1/4 socket and the tool I rented,,lol I fixed the tool and it worked so I guess its all good.
-
2018-07-23 at 8:58 AM UTC
Originally posted by POLECAT I rented a ball joint puller from the parts store and Iv been collecting tools for decades, I did break a 1 1/8 wrench and a 1 1/4 socket and the tool I rented,,lol I fixed the tool and it worked so I guess its all good.
did you use penetrating oil? that makes a big difference on nuts the size of ball joints that are rusted to fuck. -
2018-07-23 at 9:53 AM UTCI only had one bolt that gave my trouble and I used the torch to get the big nut cut free but yeah I used wd40 and pb blaster but my truck is a 94 and it was out of service from 1999 to 2010 so its almost rust free and all the bolts almost always break free with little trouble,, it always surprises me when I have to work on it,, luv my dodge
