What are you doing at the moment

1. 2024-02-28 at 2:51 AM UTC

   #48161
   

   CandyRein Black Hole
   Living my best life on lunch break..Having tacos and chips with queso while my stalker chimps out in my thread..just the usual 💗
2. 2024-02-28 at 4:25 AM UTC

   #48162
   

   CandyRein Black Hole
   Dotting my I’s and crossing my T’s baby 💗💗💗
3. 2024-02-28 at 6:18 AM UTC

   #48163
   Charles Ex Machina African Astronaut

   Originally posted by infinityshock paintable caulk works better than putty…

   
   u mean pussy ?
4. 2024-02-28 at 6:23 AM UTC

   #48164
   EduCaTional CATastropHE African Astronaut

   Originally posted by infinityshock paint requires a solvent. pressing hard enough to create a bond is…well…pressure bonding

   
   Ok well I'll add....
   
   *While not in a vacuum
   
   If you dry the solvent from paint at what point does it become not paint? There is still a little water left in the paint forever, even if just from the ambient moisture. Also you use pressure to apply paint. Just not that much
5. 2024-02-28 at 8:28 AM UTC

   #48165
   

   CandyRein Black Hole
   About to get out of the bath and heat up the rest of my tacos from earlier…
6. 2024-02-28 at 11:21 AM UTC

   #48166
   

   POLECAT POLECAT is a motherfucking ferret [my presentably immunised ammonification]

   Originally posted by infinityshock dont put it on so thick. apply one thin / primer coat then a second top coat.
   
   and dont use shit-tier walmart paint that has no solids and the viscosity of piss
   
   try something high-end that has more solids and higher viscosity

   
   u dont know me nigga,, I use top quality paint I dont fuck around with low end crap paint I was trying out pro classic trim paint and its better for spraying than brushing,, after i bought it they said they didnt want it sprayed.
   
   as for a thin coat well it wasnt thick it was enough to cover but in the corners it likes to slow roll into a drip, nothing big just little drips that take 20 min to show up. i'm cranking the heat up today so it dries faster.
7. 2024-02-28 at 12:57 PM UTC

   #48167
   

   ⠀⠀⠀⠀⠀⠀ Black Hole
   The dripping is usually caused by a lack of proper sanding.
8. 2024-02-28 at 1:12 PM UTC

   #48168
   

   infinityshock Black Hole

   Originally posted by Charles Ex Machina u mean pussy ?

   
   No one is talking about you.
9. 2024-02-28 at 1:14 PM UTC

   #48169
   Charles Ex Machina African Astronaut

   Originally posted by infinityshock No one is talking about you.

   
   you wont have a choice.
10. 2024-02-28 at 1:14 PM UTC

    #48170
    

    infinityshock Black Hole

    Originally posted by EduCaTional CATastropHE Ok well I'll add….
    
    *While not in a vacuum
    
    If you dry the solvent from paint at what point does it become not paint? There is still a little water left in the paint forever, even if just from the ambient moisture. Also you use pressure to apply paint. Just not that much

    
    Now you're just grasping at straws.
    
    Water isn't always the solvent used.
    
    Never because technically a solvent could be used to dissolve the paint then technically reapply it.
11. 2024-02-28 at 1:18 PM UTC

    #48171
    

    infinityshock Black Hole

    Originally posted by POLECAT u dont know me nigga,, I use top quality paint I dont fuck around with low end crap paint I was trying out pro classic trim paint and its better for spraying than brushing,, after i bought it they said they didnt want it sprayed.
    
    as for a thin coat well it wasnt thick it was enough to cover but in the corners it likes to slow roll into a drip, nothing big just little drips that take 20 min to show up. i'm cranking the heat up today so it dries faster.

    
    I know how to paint and if the shit is dripping you're applying it too thick.
    
    And if you're applying it too thick, what doesn't drip is quite likely going to crack...especially if you force it to dry too fast
12. 2024-02-28 at 1:18 PM UTC

    #48172
    

    infinityshock Black Hole

    Originally posted by ⠀⠀⠀⠀⠀⠀ The dripping is usually caused by a lack of proper sanding.

    
    He should sandblast the entire house
13. 2024-02-28 at 3:45 PM UTC

    #48173
    The Self Taught Man Black Hole

    Originally posted by infinityshock if the shit is dripping you're applying it too thick.

    
    This is what your sister told me last night when we finger painted with her feces
14. 2024-02-28 at 9:19 PM UTC

    #48174
    

    POLECAT POLECAT is a motherfucking ferret [my presentably immunised ammonification]
    ok then mister smarty fuckin paints answer me this then .
    
    I panted a pocket door today i started with the bathroom side and yes everything is new as fuck and came primed so I put the first coat on and let it dry it looked good then i did a second coat came back to do the other side and the bottom 2/3rds of the door started to orange peal....what chu think nigga
15. 2024-02-28 at 9:21 PM UTC

    #48175
    

    Ghost Black Hole
    Too much humidity would be my guess
16. 2024-02-28 at 9:23 PM UTC

    #48176
    

    POLECAT POLECAT is a motherfucking ferret [my presentably immunised ammonification]
    also I painted two other doors, regular doors not pocket doors two coats on both sides both came out perfect
17. 2024-02-28 at 10:13 PM UTC

    #48177
    

    infinityshock Black Hole

    Originally posted by POLECAT ok then mister smarty fuckin paints answer me this then .
    
    I panted a pocket door today i started with the bathroom side and yes everything is new as fuck and came primed so I put the first coat on and let it dry it looked good then i did a second coat came back to do the other side and the bottom 2/3rds of the door started to orange peal….what chu think nigga

    
    you like posting pictures...post pictures of the paint brush you use and the door
    
    probably too thick paint layer. im guessing you dont have a mil gauge to measure it
18. 2024-02-28 at 10:13 PM UTC

    #48178
    

    infinityshock Black Hole

    Originally posted by Solstice This is what your sister told me last night when we finger painted with her feces

    
    youre just jealous i have a sister. you have seven horny brothers and a drunk ass dad who line up for a choo-choo train on your sloppy asshole every night.
19. 2024-02-28 at 10:13 PM UTC

    #48179
    

    infinityshock Black Hole

    Originally posted by Ghost Too much humidity would be my guess

    
    or the opposite...he cranked up the heater in the room and it has 4% humidity and the paint flash cured
20. 2024-02-29 at 12:44 AM UTC

    #48180
    Michael Myers victim of incest [divide your nonresilient tucker]
    Listening to j-rock, I'm about to finish the Japanese horror movie I was watching yesterday. It's called Re/Member.