User Controls

What are you doing at the moment

  1. CandyRein Black Hole
    Living my best life on lunch break..Having tacos and chips with queso while my stalker chimps out in my thread..just the usual ๐Ÿ’—
  2. CandyRein Black Hole
    Dotting my Iโ€™s and crossing my Tโ€™s baby ๐Ÿ’—๐Ÿ’—๐Ÿ’—
  3. Originally posted by infinityshock paintable caulk works better than putty…

    u mean pussy ?
  4. EduCaTional CATastropHE African Astronaut
    Originally posted by infinityshock paint requires a solvent. pressing hard enough to create a bond is…well…pressure bonding

    Ok well I'll add....

    *While not in a vacuum

    If you dry the solvent from paint at what point does it become not paint? There is still a little water left in the paint forever, even if just from the ambient moisture. Also you use pressure to apply paint. Just not that much
  5. CandyRein Black Hole
    About to get out of the bath and heat up the rest of my tacos from earlierโ€ฆ
  6. POLECAT POLECAT is a motherfucking ferret [my presentably immunised ammonification]
    Originally posted by infinityshock dont put it on so thick. apply one thin / primer coat then a second top coat.

    and dont use shit-tier walmart paint that has no solids and the viscosity of piss

    try something high-end that has more solids and higher viscosity

    u dont know me nigga,, I use top quality paint I dont fuck around with low end crap paint I was trying out pro classic trim paint and its better for spraying than brushing,, after i bought it they said they didnt want it sprayed.

    as for a thin coat well it wasnt thick it was enough to cover but in the corners it likes to slow roll into a drip, nothing big just little drips that take 20 min to show up. i'm cranking the heat up today so it dries faster.
  7. The dripping is usually caused by a lack of proper sanding.
  8. infinityshock Black Hole
    Originally posted by Charles Ex Machina u mean pussy ?

    No one is talking about you.
  9. Originally posted by infinityshock No one is talking about you.

    you wont have a choice.
  10. infinityshock Black Hole
    Originally posted by EduCaTional CATastropHE Ok well I'll add….

    *While not in a vacuum

    If you dry the solvent from paint at what point does it become not paint? There is still a little water left in the paint forever, even if just from the ambient moisture. Also you use pressure to apply paint. Just not that much

    Now you're just grasping at straws.

    Water isn't always the solvent used.

    Never because technically a solvent could be used to dissolve the paint then technically reapply it.
  11. infinityshock Black Hole
    Originally posted by POLECAT u dont know me nigga,, I use top quality paint I dont fuck around with low end crap paint I was trying out pro classic trim paint and its better for spraying than brushing,, after i bought it they said they didnt want it sprayed.

    as for a thin coat well it wasnt thick it was enough to cover but in the corners it likes to slow roll into a drip, nothing big just little drips that take 20 min to show up. i'm cranking the heat up today so it dries faster.

    I know how to paint and if the shit is dripping you're applying it too thick.

    And if you're applying it too thick, what doesn't drip is quite likely going to crack...especially if you force it to dry too fast
  12. infinityshock Black Hole
    Originally posted by โ €โ €โ €โ €โ €โ € The dripping is usually caused by a lack of proper sanding.

    He should sandblast the entire house
  13. Originally posted by infinityshock if the shit is dripping you're applying it too thick.

    This is what your sister told me last night when we finger painted with her feces
  14. POLECAT POLECAT is a motherfucking ferret [my presentably immunised ammonification]
    ok then mister smarty fuckin paints answer me this then .

    I panted a pocket door today i started with the bathroom side and yes everything is new as fuck and came primed so I put the first coat on and let it dry it looked good then i did a second coat came back to do the other side and the bottom 2/3rds of the door started to orange peal....what chu think nigga
  15. Ghost Black Hole
    Too much humidity would be my guess
  16. POLECAT POLECAT is a motherfucking ferret [my presentably immunised ammonification]
    also I painted two other doors, regular doors not pocket doors two coats on both sides both came out perfect
  17. infinityshock Black Hole
    Originally posted by POLECAT ok then mister smarty fuckin paints answer me this then .

    I panted a pocket door today i started with the bathroom side and yes everything is new as fuck and came primed so I put the first coat on and let it dry it looked good then i did a second coat came back to do the other side and the bottom 2/3rds of the door started to orange peal….what chu think nigga

    you like posting pictures...post pictures of the paint brush you use and the door

    probably too thick paint layer. im guessing you dont have a mil gauge to measure it
  18. infinityshock Black Hole
    Originally posted by Solstice This is what your sister told me last night when we finger painted with her feces

    youre just jealous i have a sister. you have seven horny brothers and a drunk ass dad who line up for a choo-choo train on your sloppy asshole every night.
  19. infinityshock Black Hole
    Originally posted by Ghost Too much humidity would be my guess

    or the opposite...he cranked up the heater in the room and it has 4% humidity and the paint flash cured
  20. Michael Myers victim of incest [divide your nonresilient tucker]
    Listening to j-rock, I'm about to finish the Japanese horror movie I was watching yesterday. It's called Re/Member.
Jump to Top