User Controls
Posts by totse2118
-
2023-10-25 at 8:19 PM UTC in Breaking news: it’s 4/20AWWWW SHIT BRB
-
2023-10-25 at 8:13 PM UTC in I caused someone to have a mental breakdown in public for no reason by doing nothingThe crowd follows me after I run out of the store with an arm full of stolen loot and nobody has any idea it was me because ALL I EVER ASKED IS WHY ARE YOU SO SAD KID
THATS WHAT THE POINT OF THE MASK IS
THE POINT OF DAMASCUS
-
2023-10-25 at 8:10 PM UTC in What to eat to day
-
2023-10-25 at 8:09 PM UTC in I caused someone to have a mental breakdown in public for no reason by doing nothingHe came up to me aggressive so I didn't give him any real thought out response. Covid is fake and gay except for in that retards mind where he is a slave to what the internet/government/media/socialmedia says is wrong and bad that he feels justified trying to punk someone because I don't follow the crowd, his crowd of covidiots
#freedumb -
2023-10-25 at 8:03 PM UTC in Building a Garage semiconductor factoretteTube furnaces? Strong Acids? Stirplates? holy shit this is just like industrial meth cooking
Chapter Eight
Phelly/acetolle via the Tube Furllace
45
Chapter Eight
Phenylacetone via the Tube Furnace
The best way to produce phenylacetone on a large scale and continuous basis is by a catalyst bed
inside a tube furnace. This has several advantages over the other methods described in this book. Cheap
and very common acetic acid is used to react with phenylacetic acid instead of the expensive and more
exotic acetic anhydride and pyridine. Use of the tube furnace frees up the glassware for use in other
operations. The furnace requires very little attention while it is in operation, which allows the
underground chemist to spend his time turning the phenylacetone into methamphetamine. There is no
reason why this process cannot be used in small-scale production. It is just that its advantages really
come out when large amounts of phenylacetone must be produced.
In this process, a mixture of phenylacetic acid and glacial acetic acid is slowly dripped into a Pyrex
combustion tube which is tilled with pea-sized pumice stones covcred with a coating of either thorium
oxide or manganous oxide catalyst. This bed of catalyst is heated to a high temperature with a tube
furnace and the vapors of phenylacetic acid and acetic acid react on the surface of the catalyst to produce
ketones. Three reactions result.
The acid mixture is prepared so that there are three molecules of acetic acid for every molecule of
phenylacetic acid. This makes it much morc likely lhat the valuable phenylacetic acid will react with
acctic acid to produce phenylacetone rather than with another molecule of phenylacetic to produce the
useless dibenzyl ketone.
Acetic acid
o
CH C'
3 'OH
Acetic acid
)
continued
o
OCH2C CH3 + CO2 + H20
Pheny1acetone
,0 9
+ CH3C'OH- CH:3C CH3
+ CO2 + H20
Acetone
Secrets of Methamphetamine Manufacture
Eighth Edition
46
The vapors are kept moving i n the catalyst tube by a slow stream of nitrogen and eventually the
product comes out the far end of the catalyst tube. The vapors are then condensed and collected in a
flask.
500 ml SIP funn.1
….-'
r Vacuum adapter� Catalyst bed����""ITIUib·I'IU 'ln·ICi·..-,;.������� �
� � �
N2 in I'
\ "NtCnrome ltads10 transformer _____-'�
500 mlflnkJ
Figure 23
The complete apparatus for doing this reaction is shown in Figure 23. The combustion tube is made of
Pyrex and is about one meter long. It is about 2 centimeters in internal diameter, with a male 24/40
ground glass joint on one end and a female 24/40 ground glass joint on the other end. I f the underground
chemist cannot buy the tube with the glass joints already on it, there are many places which will weld
these glass joints onto the tube. He can find such a place by asking around and checking the Yellow
Pages.
The tube furnace must be 70 centimeters in kngth. The only commercially available tube furnace that 1
know of is the Hoskins tube furnace. It is a tine furnace, but only 35 em in length. Two of these would
have to be run end-to-cnd to get the required 70 cm length. The cost, including a transformer for each of
the furnaces, would bc over $700. It is better and cheaper for the chemist to build his own tube furnace.
The tube furnace starts with a section of thinwall iron tubing about 75 cm long and 3 to 3.2 cm in
internal diameter. Thinwall iron tubing has a metal thickness of .024 inch. The outside of the tubing is
wrapped with asbestos cloth or asbestos paper to a thickness of about 2 millimeters. Asbestos cloth or
paper is available at hardware stores.
Fifty feet of 28 gauge AWG nichrome wire is wrapped around the central 70 em of the tube. The
windings are made fairly taut so that the wire sinks slightly into the asbestos paper. Each winding is
evenly spaced from the previous one, about y, cm apart. One winding must not be allowed to come into
contact with another, or there will be a short circuit.
The outside of the tubing is insulated with 6 or 7 layers of asbestos paper or cloth. This insulation is
held in place by using copper wire ligatures about 6 inches long, wrapped around the outside of the
insulation, and tied at the ends to make it tight.
actually some good info there about running a tube furnace in a clandestine/garage setting
you know you live in the future when meth cooking processes are transferable skills to making computers -
2023-10-25 at 7:54 PM UTC in Building a Garage semiconductor factorette
-
2023-10-25 at 7:52 PM UTC in Building a Garage semiconductor factorette
-
2023-10-25 at 7:51 PM UTC in Building a Garage semiconductor factorettesilly coon valley USA
-
2023-10-25 at 7:51 PM UTC in I caused someone to have a mental breakdown in public for no reason by doing nothingI still wear the covid mask because I have hundreds of them and I think it looks cool and makes it easier to steal from stores
well it finally happened someone pressed me about the government and covid and bla bla bla idk what he was going on about
I just said "Fuck all that shit, covid is fake and gay" and walked away and he was just shouting COVID COVID COVID while a girl was holding him back like he wanted to fight me. Everyone on the street was staring at this dude shouting about covid while I just slipped away into a crowd of asians also wearing masks
stay brainwashed, retards. Covid is fake and gay. The vaccine does nothing. Next person to stop me on the street is getting a knuckle sandwich before they get any words from me. He's lucky that's all he got. -
2023-10-25 at 7:43 PM UTC in Food for thought
-
2023-10-25 at 7:41 PM UTC in Building a Garage semiconductor factorettehttps://www.wired.com/story/22-year-old-builds-chips-parents-garage/
IN AUGUST, CHIPMAKER Intel revealed new details about its plan to build a “mega-fab” on US soil, a $100 billion factory where 10,000 workers will make a new generation of powerful processors studded with billions of transistors. The same month, 22-year-old Sam Zeloof announced his own semiconductor milestone. It was achieved alone in his family’s New Jersey garage, about 30 miles from where the first transistor was made at Bell Labs in 1947.
With a collection of salvaged and homemade equipment, Zeloof produced a chip with 1,200 transistors. He had sliced up wafers of silicon, patterned them with microscopic designs using ultraviolet light, and dunked them in acid by hand, documenting the process on YouTube and his blog. “Maybe it’s overconfidence, but I have a mentality that another human figured it out, so I can too, even if maybe it takes me longer,” he says. -
2023-10-25 at 7:39 PM UTC in Building a Garage semiconductor factoretteI'm telling you these are the future fuys this is a big bucks idea
It all started in silicone valley growing silicon crystals on factories they called them crystal girls
Now it's all chunks in a factory in Asia
I'm trying to bring it back home and being mocked and locked 🔒🔐 by people that would prefer to order a microchip from China and Taiwan they are invested in the global system and making AMERICAN MADE chips will hurt their bottom line
Pretty easy to see where the loyalties fall with stuff like this. -
2023-10-25 at 6:03 PM UTC in Elvis Kong
-
2023-10-25 at 5:36 PM UTC in What are you thinking about....
Originally posted by aldra ahahah
he got arrested in Brisbane for lurking and filming hookers
He always get arrested and then says the country sucks
but I mean he's right he literally made the newspaper for filming someone because filming in public is illegal in Europe I guess MUH GDPR MUH PRIVACY what a bunch of soyjacks -
2023-10-25 at 5:34 PM UTC in what's the last thing you bought?
-
2023-10-25 at 5:30 PM UTC in Image hosting
-
2023-10-25 at 5:24 PM UTC in The Legend of Penis: Creamulum's Questi didn't know your name was Lanny
-
2023-10-25 at 5:23 PM UTC in Elvis KongKong isn't his last name it's his species name
-
2023-10-25 at 5:23 PM UTC in Its impossible to be depressedJUST CUM
-
2023-10-25 at 5 PM UTC in i still csnt believe it
Originally posted by Wariat Maybe i should tell them "hey you look familiar? I think i saw you on this website called oldje dot com?" Have you sens it before or were tou on it?
maybe you should just hold them down and power fuck them in the bushes instead of flip flopping like a cuck and talking about porn or age of consent like a fuckin retard
