User Controls

Why i'm smarter and more intelligent than everyone on this forum

  1. DontTellEm Black Hole
    Dump truck 🤣
  2. DontTellEm Black Hole
    Originally posted by Misguided Russian idk, wat u fink st4r st3k?







    3. Chymotrypsin can hydrolyze two substrates: N-acetylvaline ethyl ester (KM = 88 mM) and N-acetyltyrosine ethyl ester (KM = 0.66 mM).
    A. Draw a saturation plot for Chymotrypsin’s activity with these two substrates. Make sure to clearly indicate what each curve represents and label the x- and y-axis.
    B. Which substrate will require the least amount of substrate to reach ½ Vmax?
    C. Propose a reason for the difference in the affinity of the substrates based on your knowledge of chymotrypsin.


    edit:


    What in the fuck
  3. Lanny Bird of Courage
    Originally posted by swim42 I am much smarter than most if not all of you,

    lol, nostalgia cringe

    Any experts out there how to make a good pipe?

    I'm an expert by no means since I have the meager capital required to buy a pipe, but it's not exactly rocket science. A coke can is a pretty good solution.
  4. Chucking Yung Blood
    Originally posted by HapaGod2005 Rat face is quite possibly the dumbest and least self-aware person I have ever met on the web

    He stands out as a beacon of stupidity among a sea of retardation
  5. Originally posted by HapaGod2005 Rat face is quite possibly the dumbest and least self-aware person I have ever met on the web



    Originally posted by Chucking He stands out as a beacon of stupidity among a sea of retardation

    I beg to differ.
  6. Originally posted by swim42 I broke my glass pipe today, and in my quest for substitutes I stumbled upon this lovely site. From this site, I have read 2 pages of a single thread thus far (this one, in case you are wondering). So without any context regarding the overall theme of this website, views of the members, or whether the "space" referenced in the site name includes the inextricably linked time vector, or is rooted in the decidedly Newtonian mechanics consistent with the human condition; but after reading several posts by the extremely intelligent author, known as "ghost", I felt the need to respond and thus sign up for a free account.

    The reason for my response is that, while it is entirely plausible that "ghost" is simply and internet troll hell-bent on getting other members all riled-up, the first 2 pages of this thread include few, if any, comments made as to the validity of his message… that whatever one's profession, from scientist to prostitute, if they took the time to dedicate their life to mastering a craft, then it is so we dont have to. They are like the ones who came before us, offering their shoulder to stand upon so that we too can pick our fruit from the tree of knowledge as long as we heed their advice on which ones are ripe. So maybe next time you here a scientist say "vaccines are good" or a prosty say "fosta/sesta" is bad, heed their advice, or go become an expert on the subject to help out the rest of us.

    However as a realist, I know most humans are pretty dumb. I say this not to troll, but only as a statement of fact based on evidence collected over the last several years…I am much smarter than most if not all of you, and it is likely that the OP of this thread, Ghost (based on pages 1 and 2 at least) is smarter than all of you as well. I know none of you will take my, ghost's, or any expert advice really. So I am just writing this as a record of humanity, for the sake of humanity, in hopes of saving face when future AI attempt to investigate what went wrong.

    As for me, for now I have decided to try and be dumber since it is always beneficial to walk in anothers shoes before passing judgement. Maybe you people can try being smart for a bit just to see if you like it? Anyways, I figured killing brain cells is a great way to get dumb. And a great way to get dumb is to smoke wjth tina. Any experts out there how to make a good pipe? You see, I broke my glass earlier today and googled possible remedies, its actually how I found this site.

    Hello space NIGGER.

    Summoning HTS to help answer the PRESSING QUESTIONS THAT WE ALL HAVE:

    Highlight all that is true:

    The TOF analysis instrument is:
    1) stands for “time of flight”
    2) requires a flight tube on the mass spectrometer
    3) requires the equation KE=1/2mv2 for determining masses of molecules
    4) measures absorbance
    5) measures moving average

    Examples of random is/are
    1) noise caused by a cuvette
    2) noise caused by a dirty mirror and lens in a spectrofluorometer
    3) Johnson noise
    4) Thermal noise
    5) Shot noise


    In an UV-Vis spectrophotometer equipped with a diode-array detector,
    1) scans are performed one wavelength at a time, requiring greater than one minute to complete 200-800 nm scans
    2) is equipped with a photomultiplier tube (PMT) for its detector
    3) has the grating before the sample
    4) has the grating after the sample
    5) produced less noise compared to scanning spectrophotometer in our Lab exercise 1.

    The following below results in absorbance in the visible region
    1) protoporphyrin IX (PPIX)
    2) 1,3-pentene
    3) sigma to sigma* (sigma star) transitions
    4) pi to pi* (pi star) transition
    5) chlorophyll



    The following is/are true of fluorescence
    1) Compared to phosphorescence, it is a long lived emission
    2) It is a cold-body emission
    3) It involves an excited triplet state which is lower in energy than an excited singlet state
    4) It is due to vibrational relaxation to the ground state
    5) The fluorescence peak maximum occurs at a higher wavelength relative to the molecule’s absorbance peak

    The excited triplet state of a molecule
    a. has lower energy compared to the excited singlet state
    b. is required for phosphorescence
    c. is associated with parallel spin of electrons
    d. results from electron spin inversion
    e. results in diamagnetism

    The following statements are true regarding liquid column chromatographyy.
    f. the principle that makes separation work is that the analytes partitions between stationary phase and air phase
    g. can be used to concentrate your analyte
    h. the analyte moves down the column only when it is in the mobile phase
    i. in order to achieve separation of four different compounds, all compounds must have the same partition coefficients
    j. in order to achieve separation of four different compounds, each compound must have a different partition coefficient from others



    Short/Long Answers


    Fill in the blanks please.

    The voltage across a 12 (ohm) resistor that is not connected to a power source will not be _______________



    and can be described by the equation __________________. This noise is called ______________________.










    The spectral output shown below is from _____________________ lamp.




    This lamp would have to be combined with a __________________ lamp in order to provide an output from 200nm to 800 nm.



    You wish to obtain the absorbance spectrum of a sample that is highly light sensitive, which means that light exposure to the sample results in its degradation. You need to obtain a spectrum from 200 nm to 800 nm. You have a choice between a diode-array, scanning spectrophotometers, and a scanning spectrofluorometer. Which instrument should you choose to obtain the spectrum? Why? You must answer the “why” to obtain full credit.


    Your lab partner states that you should use the equation for root mean squared (rms) to measure the noise associated with the baseline spectrum below. Clearly state whether you agree or disagree by circling or highlighting the answer below, and then provide your justification. Failure to provide justification will result in no points.

    Use RMS equation DO NOT use RMS equation


    Why or why not







    An organic molecule possesses two absorption bands (@ 230 and 390 nm), fluorescence bands @ 420 resulting from excitation of 390 nm band, and a phosphorescence band (@ 622nm). Some of these electronic transitions are depicted in the Jablonski’s diagram below. Complete the diagram by drawing the hypothetical absorbance bands, fluorescence bands, and the phosphorescence band on the plot below. Clearly label absorbance bands, fluorescence bands (emission) and phosphorescence band (emission). Denote the wavelengths of these processes by properly labeling the wavelength numbers where appropriate. Be sure to also note the following: Internal conversion, Intersystem crossing, singlet and triplet excited states, vibrational relaxation in the excited states.



    A manufacturer of high-end UV-Vis spectrophotometer claims that their instrument produces only random noise in the UV region (250-300nm). You test this by taking 6 air measurements from 250 to 309 nm to determine if the noise is truly random. Based on the spectra provided, is the noise random? Circle the answer YES or NO below.

    Also, in order to receive full credit, you must also justify your answer “Yes” or “No”. Use a moving average of 9 in your calculations. Use of any other number for your moving average will result in no credit.

    Clearly label your columns and I need to be able to see the equations used.

    Only circling the answer below will result in zero points.


    YES NO
  7. Originally posted by Misguided Russian Hello space NIGGER.

    Summoning HTS to help answer the PRESSING QUESTIONS THAT WE ALL HAVE:

    Highlight all that is true:

    The TOF analysis instrument is:
    1) stands for “time of flight”
    2) requires a flight tube on the mass spectrometer
    3) requires the equation KE=1/2mv2 for determining masses of molecules
    4) measures absorbance
    5) measures moving average

    Examples of random is/are
    1) noise caused by a cuvette
    2) noise caused by a dirty mirror and lens in a spectrofluorometer
    3) Johnson noise
    4) Thermal noise
    5) Shot noise


    In an UV-Vis spectrophotometer equipped with a diode-array detector,
    1) scans are performed one wavelength at a time, requiring greater than one minute to complete 200-800 nm scans
    2) is equipped with a photomultiplier tube (PMT) for its detector
    3) has the grating before the sample
    4) has the grating after the sample
    5) produced less noise compared to scanning spectrophotometer in our Lab exercise 1.

    The following below results in absorbance in the visible region
    1) protoporphyrin IX (PPIX)
    2) 1,3-pentene
    3) sigma to sigma* (sigma star) transitions
    4) pi to pi* (pi star) transition
    5) chlorophyll



    The following is/are true of fluorescence
    1) Compared to phosphorescence, it is a long lived emission
    2) It is a cold-body emission
    3) It involves an excited triplet state which is lower in energy than an excited singlet state
    4) It is due to vibrational relaxation to the ground state
    5) The fluorescence peak maximum occurs at a higher wavelength relative to the molecule’s absorbance peak

    The excited triplet state of a molecule
    a. has lower energy compared to the excited singlet state
    b. is required for phosphorescence
    c. is associated with parallel spin of electrons
    d. results from electron spin inversion
    e. results in diamagnetism

    The following statements are true regarding liquid column chromatographyy.
    f. the principle that makes separation work is that the analytes partitions between stationary phase and air phase
    g. can be used to concentrate your analyte
    h. the analyte moves down the column only when it is in the mobile phase
    i. in order to achieve separation of four different compounds, all compounds must have the same partition coefficients
    j. in order to achieve separation of four different compounds, each compound must have a different partition coefficient from others



    Short/Long Answers


    Fill in the blanks please.

    The voltage across a 12 (ohm) resistor that is not connected to a power source will not be _______________



    and can be described by the equation __________________. This noise is called ______________________.










    The spectral output shown below is from _____________________ lamp.




    This lamp would have to be combined with a __________________ lamp in order to provide an output from 200nm to 800 nm.



    You wish to obtain the absorbance spectrum of a sample that is highly light sensitive, which means that light exposure to the sample results in its degradation. You need to obtain a spectrum from 200 nm to 800 nm. You have a choice between a diode-array, scanning spectrophotometers, and a scanning spectrofluorometer. Which instrument should you choose to obtain the spectrum? Why? You must answer the “why” to obtain full credit.


    Your lab partner states that you should use the equation for root mean squared (rms) to measure the noise associated with the baseline spectrum below. Clearly state whether you agree or disagree by circling or highlighting the answer below, and then provide your justification. Failure to provide justification will result in no points.

    Use RMS equation DO NOT use RMS equation


    Why or why not







    An organic molecule possesses two absorption bands (@ 230 and 390 nm), fluorescence bands @ 420 resulting from excitation of 390 nm band, and a phosphorescence band (@ 622nm). Some of these electronic transitions are depicted in the Jablonski’s diagram below. Complete the diagram by drawing the hypothetical absorbance bands, fluorescence bands, and the phosphorescence band on the plot below. Clearly label absorbance bands, fluorescence bands (emission) and phosphorescence band (emission). Denote the wavelengths of these processes by properly labeling the wavelength numbers where appropriate. Be sure to also note the following: Internal conversion, Intersystem crossing, singlet and triplet excited states, vibrational relaxation in the excited states.



    A manufacturer of high-end UV-Vis spectrophotometer claims that their instrument produces only random noise in the UV region (250-300nm). You test this by taking 6 air measurements from 250 to 309 nm to determine if the noise is truly random. Based on the spectra provided, is the noise random? Circle the answer YES or NO below.

    Also, in order to receive full credit, you must also justify your answer “Yes” or “No”. Use a moving average of 9 in your calculations. Use of any other number for your moving average will result in no credit.

    Clearly label your columns and I need to be able to see the equations used.

    Only circling the answer below will result in zero points.


    YES NO

    if your so smart then why are you carrying and wrapping furnitures.

    are you a spy ?
  8. Originally posted by vindicktive vinny are you a spy ?

    We all are.
  9. Ghost Black Hole
    while hung over and puking I watched 4 hours of historical documentaries

  10. Xlite African Astronaut
    Originally posted by Ghost while hung over and puking I watched 4 hours of historical documentaries


    Is the polio one any good?
  11. Ghost Black Hole
    yeah it was interesting. I didn't know polio was the main reason why disability rights and wheelchair access is so widespread now.

    The cripples jumped on the bandwagon during the civil rights movement, they made a play.

    now they are balling like curry

  12. What to they do when somebody's wheelchair falls over and they're like a turtle on its back?
  13. Ghost Black Hole
    Originally posted by ⠀⠀⠀⠀⠀⠀ What to they do when somebody's wheelchair falls over and they're like a turtle on its back?

    pushups because they are ripped and shit. I like seeing videos of buff wheelchair meatheads kicking peoples asses.

    absolute mad lads
  14. Meikai Heck This Schlong
    Originally posted by Misguided Russian Hello space NIGGER.

    Summoning HTS to help answer the PRESSING QUESTIONS THAT WE ALL HAVE:

    Highlight all that is true:

    The TOF analysis instrument is:
    1) stands for “time of flight”
    2) requires a flight tube on the mass spectrometer
    3) requires the equation KE=1/2mv2 for determining masses of molecules
    4) measures absorbance
    5) measures moving average

    Examples of random is/are
    1) noise caused by a cuvette
    2) noise caused by a dirty mirror and lens in a spectrofluorometer
    3) Johnson noise
    4) Thermal noise
    5) Shot noise


    In an UV-Vis spectrophotometer equipped with a diode-array detector,
    1) scans are performed one wavelength at a time, requiring greater than one minute to complete 200-800 nm scans
    2) is equipped with a photomultiplier tube (PMT) for its detector
    3) has the grating before the sample
    4) has the grating after the sample
    5) produced less noise compared to scanning spectrophotometer in our Lab exercise 1.

    The following below results in absorbance in the visible region
    1) protoporphyrin IX (PPIX)
    2) 1,3-pentene
    3) sigma to sigma* (sigma star) transitions
    4) pi to pi* (pi star) transition
    5) chlorophyll



    The following is/are true of fluorescence
    1) Compared to phosphorescence, it is a long lived emission
    2) It is a cold-body emission
    3) It involves an excited triplet state which is lower in energy than an excited singlet state
    4) It is due to vibrational relaxation to the ground state
    5) The fluorescence peak maximum occurs at a higher wavelength relative to the molecule’s absorbance peak

    The excited triplet state of a molecule
    a. has lower energy compared to the excited singlet state
    b. is required for phosphorescence
    c. is associated with parallel spin of electrons
    d. results from electron spin inversion
    e. results in diamagnetism

    The following statements are true regarding liquid column chromatographyy.
    f. the principle that makes separation work is that the analytes partitions between stationary phase and air phase
    g. can be used to concentrate your analyte
    h. the analyte moves down the column only when it is in the mobile phase
    i. in order to achieve separation of four different compounds, all compounds must have the same partition coefficients
    j. in order to achieve separation of four different compounds, each compound must have a different partition coefficient from others



    Short/Long Answers


    Fill in the blanks please.

    The voltage across a 12 (ohm) resistor that is not connected to a power source will not be _______________



    and can be described by the equation __________________. This noise is called ______________________.










    The spectral output shown below is from _____________________ lamp.




    This lamp would have to be combined with a __________________ lamp in order to provide an output from 200nm to 800 nm.



    You wish to obtain the absorbance spectrum of a sample that is highly light sensitive, which means that light exposure to the sample results in its degradation. You need to obtain a spectrum from 200 nm to 800 nm. You have a choice between a diode-array, scanning spectrophotometers, and a scanning spectrofluorometer. Which instrument should you choose to obtain the spectrum? Why? You must answer the “why” to obtain full credit.


    Your lab partner states that you should use the equation for root mean squared (rms) to measure the noise associated with the baseline spectrum below. Clearly state whether you agree or disagree by circling or highlighting the answer below, and then provide your justification. Failure to provide justification will result in no points.

    Use RMS equation DO NOT use RMS equation


    Why or why not







    An organic molecule possesses two absorption bands (@ 230 and 390 nm), fluorescence bands @ 420 resulting from excitation of 390 nm band, and a phosphorescence band (@ 622nm). Some of these electronic transitions are depicted in the Jablonski’s diagram below. Complete the diagram by drawing the hypothetical absorbance bands, fluorescence bands, and the phosphorescence band on the plot below. Clearly label absorbance bands, fluorescence bands (emission) and phosphorescence band (emission). Denote the wavelengths of these processes by properly labeling the wavelength numbers where appropriate. Be sure to also note the following: Internal conversion, Intersystem crossing, singlet and triplet excited states, vibrational relaxation in the excited states.



    A manufacturer of high-end UV-Vis spectrophotometer claims that their instrument produces only random noise in the UV region (250-300nm). You test this by taking 6 air measurements from 250 to 309 nm to determine if the noise is truly random. Based on the spectra provided, is the noise random? Circle the answer YES or NO below.

    Also, in order to receive full credit, you must also justify your answer “Yes” or “No”. Use a moving average of 9 in your calculations. Use of any other number for your moving average will result in no credit.

    Clearly label your columns and I need to be able to see the equations used.

    Only circling the answer below will result in zero points.


    YES NO

    I try to answer ONE QUESTION, ONE TIME because despite being totally unqualified I was in an inquisitive mood, and all of a sudden I'm the resident know it all asshole who receives summonses to answer questions I'm equally unqualified to answer. I'm saving this post for posterity and maybe one day I'll learn some of the stuff that's being asked but I am a dum dum idiot with no education so...
  15. Ghost Black Hole
    Originally posted by Meikai I try to answer ONE QUESTION, ONE TIME because despite being totally unqualified I was in an inquisitive mood, and all of a sudden I'm the resident know it all asshole who receives summonses to answer questions I'm equally unqualified to answer. I'm saving this post for posterity and maybe one day I'll learn some of the stuff that's being asked but I am a dum dum idiot with no education so…

    do a science come on

    The following users say it would be alright if the author of this post didn't die in a fire!
  16. Ghost Black Hole
    interesting

  17. Ghost Black Hole
    Ha! I made your brain interpret an invisible triangle

  18. Donald Trump Black Hole
    Originally posted by Ghost Ha! I made your brain interpret an invisible triangle


    I see a star.
  19. Originally posted by Meikai I try to answer ONE QUESTION, ONE TIME because despite being totally unqualified I was in an inquisitive mood, and all of a sudden I'm the resident know it all asshole who receives summonses to answer questions I'm equally unqualified to answer. I'm saving this post for posterity and maybe one day I'll learn some of the stuff that's being asked but I am a dum dum idiot with no education so…

    Originally posted by The Self Taught Man Problem # 1a)

    Mal wants to get fucked by a dog in doggystyle position. Assuming Mal has distance of 1ft between knee joints and asshole, and assuming that knees in doggystle are 2ft away from face (face to ground), what is distance between head and asshole?





    Originally posted by Ghost do a science come on

  20. Originally posted by Donald Trump I see a star.

    i see jéws
Jump to Top