User Controls
How to learn to cook meth Part 2 - Cleaning Pseudoephedrine Pills
-
2017-01-05 at 3 AM UTCAll credit goes to tramp for writeup, RIP.
Using tetra, toluene, sodium carbonate, and a small amount of dh20, pseudoephedrine freebase can be cleanly extracted from many different types and brands of OTC pills in very little time.
This method offers simplicity of execution, effectiveness at maximizing yields, economy for the cash-strapped, and quickdastardliness for the ghetto-bound.
Pills – any OTC pseudoephedrine compilation (with pseudoephedrine as the only active ingredient). Includes: 30mg “Red Hots”, 120mg “12-hour” name brand and generics, 240mg “24-hour” name brand. Pills exist as such only long enough to waltz with washing soda (sodium carbonate) in a blender on high.
MATERIALS
o Beaker – 400ml
o Other heat proof glassware for evaporating or cooling solvent
o Hot plate
o Safety glasses, latex gloves
o enhancement paper or coffee enhancements or cotton balls
o Glass or wood stirring implement (1/2 of a wooden clothespin is splendid)
- Chemicals –
Tetrachloroethylene (brake cleaner, red can (not green) at your local skunk-boys auto supply.)
Toluene or VM&P Naphtha (if you enjoy evaporating solvents, choose Toluene. If you are safety conscious and have some extra time, choose VM&P and chill instead of evaporate).
Sodium Carbonate (washing soda, ph minus pool stuff at dome hepot ).
DH20 (tap works as well)
- Abstract of Procedure –
Grind pills with sodium carbonate in a blender
Dump formed powder into beaker
Saturate powder with tetrachloroethylene
Pour toluene into beaker until the toluene stands about 1” above the pill mass
Heat thoroughly while stirring (let the heat from the bottom transfer into the toluene long enough to bring just to boiling point.
Decant liquid from solids through a cotton ball or other suitable enhancement.
Evaporate decanted solvent (Toluene) or Chill (VM&P) to precipitate freebase crystals.
- Standard Procedure -
1. Combine approximately the same volume of sodium carbonate as unground pill volume: put the pills in the blender, grab a handful of carbonate and toss an eyeballed estimate on top of the pills. A reasonable approximation for 1 box of 96 30mg “red hots” would be about 2.5- 3 tablespoons. Cover the blender, run on high for about 1 minute. Let stand 5 minutes before removing lid.
2. pour the powder created in step 1 into a dry glass beaker – the dry pill mass should not be more than 1/3 of the beaker volume.
3. Carefully hose the powder-in-beaker from step 2 with tetrachloroethylene straight from the can. Hint: direct the stream to the upper part of the beaker onto the glass wall to prevent scattering your dry pill mass. Otherwise, spray the tetra in a glass first, then pour into the beaker. Saturate the pill mass: this means that all of the powder should be wet, but there should be no free-running tetra. Tip the beaker just to make sure that the tetra doesn’t run. The mass should be one glorious whole. If you added to much tetra, the application of heat at this point is prudent – not only to evaporate the extra tetra, but to drive the tetra into the powder more thoroughly. 120mg pills can soak up quite a bit of tetra, so saturate, heat, and add more tetra until you reach this point of saturation. Extra tetra can be soaked up easily from the top of the pill mass with a couple of cotton balls.
4. pour toluene into the beaker until the level of toluene is approximately 1” above the pill mass. This will vary with the overall magnitude of the extraction you are performing – experiment with 3 boxes of 96, using this one-inch approach. You have the option of using VM&P naphtha at this point instead of the toluene – in the precipitation stage, you’ll chill the naptha to crash the crystals. You’ll evap the toluene. Evaping hydrocarbon solvents is nasty business. Just ask Geez. The naptha chill takes 1-2 hours, possibly endangering your position. Your pays yo’ money, you takes yo’ shot.
5. add a dash of water. (for 3 boxes of 96, use 2 tablespoons). Start with little h20 – you can always add more toluene and another shot of h20 if you want to try another pull. You’ll screw the whole gig if you add too much h20 for the first pull.
6. Apply heat gently while stirring until the contents of the beaker are at the boiling point, then back off. Practice makes perfect. Keep the temperature just below that boiling point for 2 minutes (4 minutes if using 120mg 12-hour pills). Stir continuously with appropriate implement.
7. Remove beaker from heat source and let settle for 1 minute.
8. decant all liquid from beaker into a suitable heat-resistant glass pan, bowl, etc. Visionware rules the roost. You may choose to decant through a enhancement/funnel, or just keep a cotton ball at the lip of the beaker as you pour.
9. Evap the toluene on low heat for clean crystals easily lifted. Or if using VM&P naphtha, place in freezer for 2 hours, enhancement, and place the crystals on a coffee enhancement to dry.
Micro crystalline cellulose precipitates out of cold xylene, preboil in straight xylene will remove the bulk of it right away. throw this out or distill it to recover the solvents.
proceed with standard anhydrous extraction into xylene/tetra using Na2CO3
reflux it for a good long time then enhancement it fast and gas it hot
enhancement it hot
rinse it with cold dry mek
recrystallize it from mek/water
then again if you want from either water or an alcohol and acetone.
Investigate the solubility of your particular set of inactives against possibly toluene.
different solvents have slightly different characteristics
some report good results adding about 25% naphtha to the xylene preboil
sometimes pills have unlisted gaaks in them.
pills are hard.
toluene has lower boiling point than xylene but its thinner and more aromatic
its a more selective solvent than xylene
xylene is real aggressive, eats plastic and wax.
Toluene is real nice for extracting final product into
xylene is best all around pill extraction solvent.
Ethyl acetate works really well, too but it needs to be mixed about 10% with ethanol for best effect
and crystallization of the HCl back out of the azeotrope is a pain in the ass
xylene is generally best.
Avoid water and avoid reagents with really high pH... that is, avoid KOH and NaOH with pills as the high pH activates certain gaaks... or so they say...Na2CO3 is plenty high enough pH but doesn't seem to effect the gaaks... water sets the gaaks loco! avoid water unless you can duplicate the human digestive tract in the lab... i mean, people do swallow these pills and the shit does wind up in their blood... so if the body can separate it, so can we, but water methods normally result in a mass of plastic goop... alcohols are treacherous as well...
(not Pseudoephedrine extraction but still pretty useful info)
https://www.youtube.com/watch?v=ZdTc1AFTKZ0
https://www.erowid.org/archive/rhodium/pdf/pseudoephedrine.us6359011.pdf
https://www.erowid.org/archive/rhodium/chemistry/pseudo.xtract.waterless.html
https://www.erowid.org/archive/rhodium/chemistry/pseudo.xtract.fullturps.html
https://www.erowid.org/archive/rhodium/chemistry/pseudo.xtract.smackdown.html
https://www.erowid.org/archive/rhodium/chemistry/pseudo.xtract.straightbee.html
https://www.erowid.org/archive/rhodium/chemistry/pseudo.xtract.straight-e.html
http://chemistry.mdma.ch/hiveboard/crystal/000468062 -
2017-01-05 at 7:58 AM UTCFound this n thought I'd share it. What do u think?
New Clean Gassing Method!
Gassing is a love hate kind of thing and none of the current methods seem to
perform consistently or safely. Some methods make too much and some make too
little. Most are difficult to control, more importantly difucult to stop. SWIVE
has rusted more tools and electronic equipment than he cares to think of. Had a
gassing bottle blow up once (hose clogged suddenly, while he wasn't watching) and
suck back can ruin your whole day. Most drain cleaner Sulfuric Acid contains
foaming additives that create a dangerous mess.
I have tried all the various gassing methods ie: Sulfuric Acid & Salt, Sulfuric
Acid & HCL, Aluminum & HCL, Air bubbled through HCL, but I've never been totally
happy with any of them. The methods using Sulfuric Acid always taste and/or smell
funny. The Aluminum & HCL is wet, week, messy and generates too much heat. The
Air bubbled through HCL is clean but is a little slow for SWIVE's taste. So SWIVE
started thinking how could he improve the process. After all we're just trying to
seperate the HCL from the water, right?
Introducing -> HCL over calcium chloride! Now before you start to whine about how
this won't work like your current method, try this.
Materials
(1) Plastic Wash Bottle
(1) Box of Damp Rid (calcium chloride)
Muratic Acid (HCL)
Something that needs gassing
Method
Take the plastic wash bottle and remove the center tube that runs to the bottom.
Fill the bottle 1/3 full of Damp Rid. Now carefully add muratic acid until about
2/3 of the Damp Rid is covered. Let this sit for 2 minutes. Your Done!
Usage
To gas you simply squeeze the wash bottle, thats right, insert the tip of the
wash bottle into whatever your gassing and squeeze. pull the tip out before the
end of the squeeze to avoid sucking whatever your gassing into the bottle. Repeat
as needed. You will be surprised at the concentration and dryness of the HCL
produced. You will also be surprised at how long that small amount of muratic
acid will last. Just shake the bottle every now and then and it will keep coming.
One fill usually lasts SWIVE several rxn's until a refill is needed. Clean,
simple, controllable and no liquid acid to accidenly spill or leak into your
product.
SWIVE used TFSE and did not see a mention of this method, so he thinks it is
original (pat on the back) Now where's the Hive Patent Office.
http://chemistry.mdma.ch/hiveboard/newbee/000265010.html -
2017-01-05 at 1:49 PM UTCGassing there are lots of different ways to do this with different chemicals but its all very simple, I like the aluminum foil ball method. Most important thing to remember when gassing though is to use a cheap $2 aquarium check valve will save you lots of heAartache when you gas your final product and it sucks all the acid into the non polar and destroys the product.
or you can just use a trap. -
2017-01-07 at 11:43 PM UTCIs this really Muriatic Acid? Will it work? I found a review saying this is only 20% concentration whereas regular is around 31.5%.
https://www.walmart.com/ip/Klean-Strip-Green-Muriatic-Acid-Gallon/20531315
Post last edited by plumpkatt1 at 2017-01-07T23:50:26.318251+00:00 -
2017-01-08 at 12:02 PM UTCIt probably just has water or something in it.
-
2017-01-09 at 3:58 PM UTCare the fumes produced from chilling toxic?
i dont want to put this in a freezer full of food and end up killing myself and my dad -
2017-01-09 at 7:09 PM UTCChilling what?.
The only thing you will ever put in the freezer is pseudoephedrine/MA recrystallized from acetone and the container is sealed so there no vapor. -
2017-01-18 at 5:45 AM UTCcleaning pseudophed is childs play , can't you just buy ephedrine tabs and clean the guaf off of it?
-
2017-01-18 at 8:05 AM UTCMillions of dollars has been spent to make the pills extraction proof, its impossible to make it 100% proof but at the moment it takes lots of work and stops 95% of people dead in their tracks and makes it So shake and bake fucks up and makes more toxic byproducts.
-
2017-03-28 at 12:18 AM UTCscronaldo j bump
-
2018-03-20 at 11:02 AM UTCTHIS IS supposed to impress those of us who actualy managed to whip up decent crank from one pot methods WITHOUT reverting to biker-era michelobe-extra commercial times in which we had to de-gakk our pills using wasteful processes long before reduction took place? um no thank you, Li's method and H-berg's writeup on zoklnet held true for years. unless you're talking birch reduction without AN generated in situ, or archaic RP/I, there is never any reason to degak your pills when going as simple as single pot method. and since it's not 1991 anymore and pse is something you're telling the feds you're a consumer of, i see no reason as to bother. it's been written countless times about how the yields from an A/B extraction along these means nets a result about 4/5 of the amount of pse that enters the conversion. unlike snb, which converts nearly if not all of it.
who wants to gas their shit twice? and how does one return the hcl to a base for the final reduction? not me. and i always had good yeilds.
but then again i'm a prick and didn't actually read this entire long rambling post, for I saw no point in it.
guess totse2 was where the true visionaries were at.
have fun pretending like it's 1988 again boys. make us some MCAT if that's the route you're so intent on pursuing. seems like a fun lil diversion -
2018-03-20 at 11:15 AM UTCRP/I may be outdated but at least you won't blow up your entire apartment building doing it
-
2018-03-20 at 11:30 AM UTC
Originally posted by donutshop THIS IS supposed to impress those of us who actualy managed to whip up decent crank from one pot methods WITHOUT reverting to biker-era michelobe-extra commercial times in which we had to de-gakk our pills using wasteful processes long before reduction took place? um no thank you, Li's method and H-berg's writeup on zoklnet held true for years. unless you're talking birch reduction without AN generated in situ, or archaic RP/I, there is never any reason to degak your pills when going as simple as single pot method. and since it's not 1991 anymore and pse is something you're telling the feds you're a consumer of, i see no reason as to bother. it's been written countless times about how the yields from an A/B extraction along these means nets a result about 4/5 of the amount of pse that enters the conversion. unlike snb, which converts nearly if not all of it.
who wants to gas their shit twice? and how does one return the hcl to a base for the final reduction? not me. and i always had good yeilds.
but then again i'm a prick and didn't actually read this entire long rambling post, for I saw no point in it.
guess totse2 was where the true visionaries were at.
have fun pretending like it's 1988 again boys. make us some MCAT if that's the route you're so intent on pursuing. seems like a fun lil diversion
How is it wasteful lol it takes 1 day of processing and gives you clean feedstock. Garbage in = garbage out -
2021-09-13 at 6:04 PM UTC
Originally posted by The Self Taught Man All credit goes to tramp for writeup, RIP.
Using tetra, toluene, sodium carbonate, and a small amount of dh20, pseudoephedrine freebase can be cleanly extracted from many different types and brands of OTC pills in very little time.
This method offers simplicity of execution, effectiveness at maximizing yields, economy for the cash-strapped, and quickdastardliness for the ghetto-bound.
Pills – any OTC pseudoephedrine compilation (with pseudoephedrine as the only active ingredient). Includes: 30mg “Red Hots”, 120mg “12-hour” name brand and generics, 240mg “24-hour” name brand. Pills exist as such only long enough to waltz with washing soda (sodium carbonate) in a blender on high.
MATERIALS
o Beaker – 400ml
o Other heat proof glassware for evaporating or cooling solvent
o Hot plate
o Safety glasses, latex gloves
o enhancement paper or coffee enhancements or cotton balls
o Glass or wood stirring implement (1/2 of a wooden clothespin is splendid)
- Chemicals –
Tetrachloroethylene (brake cleaner, red can (not green) at your local skunk-boys auto supply.)
Toluene or VM&P Naphtha (if you enjoy evaporating solvents, choose Toluene. If you are safety conscious and have some extra time, choose VM&P and chill instead of evaporate).
Sodium Carbonate (washing soda, ph minus pool stuff at dome hepot ).
DH20 (tap works as well)
- Abstract of Procedure –
Grind pills with sodium carbonate in a blender
Dump formed powder into beaker
Saturate powder with tetrachloroethylene
Pour toluene into beaker until the toluene stands about 1” above the pill mass
Heat thoroughly while stirring (let the heat from the bottom transfer into the toluene long enough to bring just to boiling point.
Decant liquid from solids through a cotton ball or other suitable enhancement.
Evaporate decanted solvent (Toluene) or Chill (VM&P) to precipitate freebase crystals.
- Standard Procedure -
1. Combine approximately the same volume of sodium carbonate as unground pill volume: put the pills in the blender, grab a handful of carbonate and toss an eyeballed estimate on top of the pills. A reasonable approximation for 1 box of 96 30mg “red hots” would be about 2.5- 3 tablespoons. Cover the blender, run on high for about 1 minute. Let stand 5 minutes before removing lid.
2. pour the powder created in step 1 into a dry glass beaker – the dry pill mass should not be more than 1/3 of the beaker volume.
3. Carefully hose the powder-in-beaker from step 2 with tetrachloroethylene straight from the can. Hint: direct the stream to the upper part of the beaker onto the glass wall to prevent scattering your dry pill mass. Otherwise, spray the tetra in a glass first, then pour into the beaker. Saturate the pill mass: this means that all of the powder should be wet, but there should be no free-running tetra. Tip the beaker just to make sure that the tetra doesn’t run. The mass should be one glorious whole. If you added to much tetra, the application of heat at this point is prudent – not only to evaporate the extra tetra, but to drive the tetra into the powder more thoroughly. 120mg pills can soak up quite a bit of tetra, so saturate, heat, and add more tetra until you reach this point of saturation. Extra tetra can be soaked up easily from the top of the pill mass with a couple of cotton balls.
4. pour toluene into the beaker until the level of toluene is approximately 1” above the pill mass. This will vary with the overall magnitude of the extraction you are performing – experiment with 3 boxes of 96, using this one-inch approach. You have the option of using VM&P naphtha at this point instead of the toluene – in the precipitation stage, you’ll chill the naptha to crash the crystals. You’ll evap the toluene. Evaping hydrocarbon solvents is nasty business. Just ask Geez. The naptha chill takes 1-2 hours, possibly endangering your position. Your pays yo’ money, you takes yo’ shot.
5. add a dash of water. (for 3 boxes of 96, use 2 tablespoons). Start with little h20 – you can always add more toluene and another shot of h20 if you want to try another pull. You’ll screw the whole gig if you add too much h20 for the first pull.
6. Apply heat gently while stirring until the contents of the beaker are at the boiling point, then back off. Practice makes perfect. Keep the temperature just below that boiling point for 2 minutes (4 minutes if using 120mg 12-hour pills). Stir continuously with appropriate implement.
7. Remove beaker from heat source and let settle for 1 minute.
8. decant all liquid from beaker into a suitable heat-resistant glass pan, bowl, etc. Visionware rules the roost. You may choose to decant through a enhancement/funnel, or just keep a cotton ball at the lip of the beaker as you pour.
9. Evap the toluene on low heat for clean crystals easily lifted. Or if using VM&P naphtha, place in freezer for 2 hours, enhancement, and place the crystals on a coffee enhancement to dry.
Micro crystalline cellulose precipitates out of cold xylene, preboil in straight xylene will remove the bulk of it right away. throw this out or distill it to recover the solvents.
proceed with standard anhydrous extraction into xylene/tetra using Na2CO3
reflux it for a good long time then enhancement it fast and gas it hot
enhancement it hot
rinse it with cold dry mek
recrystallize it from mek/water
then again if you want from either water or an alcohol and acetone.
Investigate the solubility of your particular set of inactives against possibly toluene.
different solvents have slightly different characteristics
some report good results adding about 25% naphtha to the xylene preboil
sometimes pills have unlisted gaaks in them.
pills are hard.
toluene has lower boiling point than xylene but its thinner and more aromatic
its a more selective solvent than xylene
xylene is real aggressive, eats plastic and wax.
Toluene is real nice for extracting final product into
xylene is best all around pill extraction solvent.
Ethyl acetate works really well, too but it needs to be mixed about 10% with ethanol for best effect
and crystallization of the HCl back out of the azeotrope is a pain in the ass
xylene is generally best.
Avoid water and avoid reagents with really high pH… that is, avoid KOH and NaOH with pills as the high pH activates certain gaaks… or so they say…Na2CO3 is plenty high enough pH but doesn't seem to effect the gaaks… water sets the gaaks loco! avoid water unless you can duplicate the human digestive tract in the lab… i mean, people do swallow these pills and the shit does wind up in their blood… so if the body can separate it, so can we, but water methods normally result in a mass of plastic goop… alcohols are treacherous as well…
(not Pseudoephedrine extraction but still pretty useful info)
https://www.youtube.com/watch?v=ZdTc1AFTKZ0
https://www.erowid.org/archive/rhodium/pdf/pseudoephedrine.us6359011.pdf
https://www.erowid.org/archive/rhodium/chemistry/pseudo.xtract.waterless.html
https://www.erowid.org/archive/rhodium/chemistry/pseudo.xtract.fullturps.html
https://www.erowid.org/archive/rhodium/chemistry/pseudo.xtract.smackdown.html
https://www.erowid.org/archive/rhodium/chemistry/pseudo.xtract.straightbee.html
https://www.erowid.org/archive/rhodium/chemistry/pseudo.xtract.straight-e.html
http://chemistry.mdma.ch/hiveboard/crystal/000468062
Can I substitute Toluene with Diythlen ether ? And what is the steps if I use Xylene it’s little confusing. -
2021-09-21 at 8:51 PM UTC
-
2021-09-21 at 8:55 PM UTC
Originally posted by Alimemo Can I substitute Toluene with Diythlen ether ? And what is the steps if I use Xylene it’s little confusing.
yes most non polar solvents will work
the xylene thing is just the tetra but you boil in xylene first and enhancement it also freebasing the pills with sodium carbonate and gassing them it's a strange process but it's designed to get past modern pill formulations
https://www.erowid.org/archive/rhodium/pdf/pseudoephedrine.us6359011.pdf
https://www.erowid.org/archive/rhodium/chemistry/pseudo.xtract.waterless.html
https://www.erowid.org/archive/rhodium/chemistry/pseudo.xtract.fullturps.html
https://www.erowid.org/archive/rhodium/chemistry/pseudo.xtract.smackdown.html
https://www.erowid.org/archive/rhodium/chemistry/pseudo.xtract.straightbee.html
https://www.erowid.org/archive/rhodium/chemistry/pseudo.xtract.straight-e.html
http://chemistry.mdma.ch/hiveboard/crystal/000468062 -
2022-03-17 at 7:36 AM UTCRolex Watches
Rolex
Pandora jedielry
Pandora Charms
Pandora jedielry
Pandora Charms
Travis Scott Jordan 1
Air Jordansv121212
Jordan 11v1212
Jordan 11
Rolex Watches
Rolex UK
Jordans Shoes
Moncler Outlet
Off White
Yeezy 450
Yeezy 500
Nike Outlet
Jordans 4
Jordan Retro 4
Jordan Shoes
Yeezy
Yeezy 700
Yeezy Supply
Off White Shoes
NFL Jerseys
Rolex
Retro Jordans
Nike Jordan
Jordan Shoes
Jordans Shoes
Yeezy 350 V2
Adidas Yeezy
Yeezy
Yeezy 700
Yeezy
Yeezy Shoes
Nike Outlet
Yeezy
Yeezy Foam Runner
Nike Outlet
Nike Outlet
Jordan AJ 1
UNC Jordan 1
Yeezy
Jordan 13
Jordan AJ 1
Yeezy Supply
Yeezy Zebra
Jordan 5
Jordan 1 Low
Air Jordans
Pandora Charms
Adidas UK
Adidas Yeezy
Yeezy 350
Jordan 1
YEEZY SUPPLY
Nike Shoes
Nike Outlet
Pandora Outlet
Jordan Shoes
Air Jordan 4
Adidas Yeezy
Air Jordan 11
Air Jordan 1
Jordan 1
Nike Jordans
Nike Jordan
Jordan 1s
Pandora UK
Pandora
Nike Jordan 1
Jordan 1
Yeezy Slides
Yeezy
Nike Air VaporMax
Nike Vapormax Flyknit
Air Jordan 1 Mid
Adidas yeezy
Yeezy 350
Nike Shoes
Nike Outlet
Yeezy
NFL Shop Official Online Store
Nike UK
Yeezy
Yeezy 350 -
2023-10-26 at 10:52 PM UTC
Originally posted by plumpkatt1 Found this n thought I'd share it. What do u think?
New Clean Gassing Method!
Gassing is a love hate kind of thing and none of the current methods seem to
perform consistently or safely. Some methods make too much and some make too
little. Most are difficult to control, more importantly difucult to stop. SWIVE
has rusted more tools and electronic equipment than he cares to think of. Had a
gassing bottle blow up once (hose clogged suddenly, while he wasn't watching) and
suck back can ruin your whole day. Most drain cleaner Sulfuric Acid contains
foaming additives that create a dangerous mess.
I have tried all the various gassing methods ie: Sulfuric Acid & Salt, Sulfuric
Acid & HCL, Aluminum & HCL, Air bubbled through HCL, but I've never been totally
happy with any of them. The methods using Sulfuric Acid always taste and/or smell
funny. The Aluminum & HCL is wet, week, messy and generates too much heat. The
Air bubbled through HCL is clean but is a little slow for SWIVE's taste. So SWIVE
started thinking how could he improve the process. After all we're just trying to
seperate the HCL from the water, right?
Introducing -> HCL over calcium chloride! Now before you start to whine about how
this won't work like your current method, try this.
Materials
(1) Plastic Wash Bottle
(1) Box of Damp Rid (calcium chloride)
Muratic Acid (HCL)
Something that needs gassing
Method
Take the plastic wash bottle and remove the center tube that runs to the bottom.
Fill the bottle 1/3 full of Damp Rid. Now carefully add muratic acid until about
2/3 of the Damp Rid is covered. Let this sit for 2 minutes. Your Done!
Usage
To gas you simply squeeze the wash bottle, thats right, insert the tip of the
wash bottle into whatever your gassing and squeeze. pull the tip out before the
end of the squeeze to avoid sucking whatever your gassing into the bottle. Repeat
as needed. You will be surprised at the concentration and dryness of the HCL
produced. You will also be surprised at how long that small amount of muratic
acid will last. Just shake the bottle every now and then and it will keep coming.
One fill usually lasts SWIVE several rxn's until a refill is needed. Clean,
simple, controllable and no liquid acid to accidenly spill or leak into your
product.
SWIVE used TFSE and did not see a mention of this method, so he thinks it is
original (pat on the back) Now where's the Hive Patent Office.
http://chemistry.mdma.ch/hiveboard/newbee/000265010.html
Pplexxed tried gassing in every feasible format he could ever find to read. P.S. Pplexxed has been here since the original TOTSE and the days when the HIVE was first buzzing strong. Mid late '90's.
What he dreamed that works for him is this and it's simple.
He takes a regular 16 oz soda bottle or even better the small 12 oz bottle if available. Calcium chloride he finds from prestone driveway heat. Ice melt on the winter isles at local store. He fills bottle, after thoroughly cleaning and thoroughly drying, halfway full of round granulars. The lid of the bottle he has already prepared. By simply drilling a hole slightly smaller than the tubing. He uses 5/16 OD tubing. I assume polyurethane. The kind of line you run water to your refrigerator with. Flexible but semi hard. The line fits in the hole in the lid very snugly. And it does not leak gas! There's no need to tape or glue or any other such nonsense. As this builds no pressure! He has a hot plate with a small pan full of boiling water sitting right next to where he's going to gas. He preheats the liquid to be gassed. As warm liquid accepts gas much better than cold liquid! Then he carefully adds one starter fluid cap of muriatic acid. The 31% bought off shelf anywhere kind. Screw lid on snugly. Wait about 30 seconds. Then to gas take pop bottle put just bottom of bottle in boiling water. Dry HCL gas comes out 'quick and thick'! Just as if it were aluminum foil in HCL but WAY dryer gas. The gas is very dry and it works very well. Then when he's done gassing he takes it out of the boiling water and sits it right beside him. Within about 30 seconds no gas is coming out to tube or if any very little. This one time gassing bottle works for anything from a very small personal amount up to his personal favorite the thousand pill 1 oz bubble. If you're someplace safe you can just cap the bottle loosely and it will not be an issue until you dispose of your trash. If you want to stop it completely and instantly. Simply fill it with water and boom it's done. Pplexxed had no patience for slow gassing procedures and this worked tried and true every time! As was stated this is a 'one-time' gassing bottle! Pplexxed did NOT enjoy the same success if trying to reuse or add more acid to bottle. You will end up with wet gas! And nobody wants that. Ingredients are cheap, pop bottles are free, so after bottle comes out of water do not use again! Pro tip once bottle is cleaned and dried and granulars added. With a cap on tightly it stores forever. So you can make what you need in advance and not have to mess with it at the time. Try it I think you'll like it it works very well! Each bottle one time do not reuse after comes out of water! Hope this helps someone enjoy! 😁👍