User Controls

Vicks Vaporub kicks ass

  1. #21
    Rape Monster Naturally Camouflaged
    Originally posted by aldra yeah it's kind of like vaporub but it's stronger and a thin oil rather than an ointment, also has a really strong herbal smell

    I saw this stuff yesterday that was turpentine oil mixed with camphor, sounded interesting
  2. #22
    Originally posted by Bradley I wrap myself in a thin bed sheet,

    ...that's enough homo-eroticism for one day laddo.
  3. #23
    Originally posted by aldra

    thats for colonized, unfree people living under White Supremacy.
  4. #24
    The NWO Elites rub rendered baby's fat on their chest and testicles.
  5. #25
    Pete Green African Astronaut
    Originally posted by rollyourowncig Use the Brand Name one, fuck knock off brands.

    dude. the off-brands buy the rejected specs of the named brands. they work the same, but they missed just slightly in chemical analysis to be rejected by QC but still the same effectiveness. taste, color, lack of odor etc (this applies to all products)

    those giant bags of cereal you buy super cheap at box stores are just QC rejected but still edible.
  6. #26
    Name brand, off brand...make is same factory by the same lowly workers.

    All that matters is the same active ingredient.
  7. #27
    Originally posted by Jiggaboo_Johnson All that matters is the same active ingredient.

    in different quantity.
  8. #28
    Originally posted by vindicktive vinny in different quantity.

    Well no, in the same quantity dumbo.

    It's easy to look on the back and see 20mg of XXX and see it's the same as the brand name one.
  9. #29
    Here in the west Vinny, places like Walgreens have their own brand...So you can pick up a name brand one, look at walgreens equivalent...compare the active ingredients (inc qty) and quickly figure out the off brand/walgreens brand is the same shit for 2/3rd the price of the name brand one.
  10. #30
    Some people eat a little bit when they get a cold.
  11. #31
    Originally posted by Jiggaboo_Johnson Here in the west Vinny, places like Walgreens have their own brand…So you can pick up a name brand one, look at walgreens equivalent…compare the active ingredients (inc qty) and quickly figure out the off brand/walgreens brand is the same shit for 2/3rd the price of the name brand one.

    Vinny would actually be attending "Beauty Secrets" in Mongolia for his cosmetic needs.
  12. #32
    rollyourowncig Yung Blood
    Originally posted by Cowboy2013 Don't be coy. Write a tutorial telling us how to meth

    The forthcoming post is a 100% hypothetical scenario that I’ve generated based on the information that I’ve picked up reading this thread… I have never actually done any of the things listed in this thread, as they are illegal, and I do not want anyone else to do anything in this thread either as it is illegal. It is simply a fictitious story that I imagined, and a Real Time Participatory story that anyone can add to.
    I know that these “Shake n Bake” (SnB) threads are getting CRAZY redundant, especially with complete fucking retards like Zac starting a new thread to simply restate the same misinformation in an even LESS organized manner (Writing similar to a 6 year old retarded chimp…”lol”… fagot). So, why am I starting yet another thread?
    • To explain the process, start to finish, in an organized fashion in great enough detail that ANYONE will be able to follow the procedure with successful results… Including those of you who failed in the past as well as those of you waiting to take that first step. (Assuming you use the chemicals that I list and follow the steps).
    • To hopefully show the SnB critics that, if baked properly, this shit will stand proud against any meth produced with any technique (TEK) (This means you Glenns & Diacetyl)…
    o Gets you twacked for 8-36 hours depending on tolerance – YES
    o Can be eaten, snorted, smoked, injected, booty bumped (anally administered) – YES
    o Can be produced and cleaned to the point where it runs well on foil or glass pipe, leaves little to no residual black trail on foil or pipe, and cracks back (dries back from oil into a crystalline state) –YES… ~Even with a water pull Beans ~
    o Can be recrystallized into clear/transparent glass shards – YES
    o Can produce around a 90% yield with extreme purity - YES
    § Remember, d-meth (The most desired isotope ofmeth which is produced by SnB TEK) is d-meth regardless of how you get the precursors [The starting materials such as Pseudoephedrine (PSE)] to reduce into meth. I promise you, I gram of 100% pure d-meth produced by SnB is exactly the same as 1 gram of 100% pure d-meth produced by a Birch Reduction, a Red Phosphorus Reduction, or any other TEK… It’s the impurities that make the meth different, and these impurities vary by TEK.
    • If you are not familiar with these TEK’s… You don’t need to be, but I recommend that you do a little more research before you get started.
    • BTW Contrary to popular belief, P2P TEK is NOT better than PSE TEK’s… P2P produces Racemic (50% d-meth isotope and 50% l-meth isotope) Meth, so it is LESS desirable assuming that the meth produced from both TEK’s are the same purity level.

    • Finally, because I want ALL of you, and your friends… AS MANY PEOPLE AS POSSIBLE… to cook meth… Why? So that the law enforcement agencies are so outnumbered by meth labs that it greatly reduces the chance that I will get caught and locked up… SAFETY IN NUMBERS BITCHES! I only bake for me and my wife, so I am not competing with YOU for customers…COOK, SELL, GET HIGH, GET RICH!!! I DON’T GIVE A FUCK, JUST COOK!!!
    o If I can make this shit detailed enough that you all can produce unbelievable shit right out of the gate, and you see how EASY and RELATIVELY SAFE it really is when it is properly explained, there will be many more PSE purchases every month and many more labs on the street, thus decreasing the chance that they will have the time or the resources to specifically worry about me.
    o When you see how easy this is, and what it makes, you will end up teaching friends, and as word spreads, my odds of avoiding trouble continue to increase.
    Look, here’s the deal… I have only been doing this for about 6 months or so now (I’d say about 50 cooks or so). Prior to that, I have second hand experience with Birch and RP/I. But, I have 20 years of abusing meth, so Iam a pretty qualified critic, I am a smart guy with an engineering degree although I am a business owner now. I have researched this TEK pretty well over the last 6 months, and I have a decent amount of hands on experience with surprising success…At least it surprised the fuck out of me to make fire Dope with SnB.
    Most of the information that you find in this thread is already posted in the original thread, and I am simply plagiarizing it from multiple sources.

    Here’s what this Thread will do for you:
    ~ Provide a source of information based on experience rather than theory or chemistry
    ~ Provide an outlet where cats like you will hopefully continue to freely share correct, honest, and helpful information learned through experience... In other words, please give back...
    • Weed out all of the stupid misinformation previously posted by shithead losers.
    • Organize the good information into a very detailed but simple TEK that, hopefully, just about anyone can follow and produce great meth.
    • Painfully focus on the details of EVERYTHING in hopes that many of you will finally feel comfortable enough to give this a try or try it again by alleviating the fear of the unknown.
    • Provide accurate information based most heavily on my successful experience integrated with accurate information from previous threads and my research.

    Here’s what this thread will NOT do for you:
    • Provide much related to the scientific background and reasoning for the steps of the TEK… I do not understand chemistry enough to do much of that (talk to smiles…she’s smart), and you will not need to understand much of the chemistry after reading this TEK… JUST BUY THE CORRECT INGREDIANTS AND FOLLOW THE FUCKING STEPS!
    • Give a bunch of alternatives… You can all hash out the "Coleman’s or Naphtha, Smartwater or Sodastream, Can I use Kerosene & brown ice pack crystals & Draino?" on your own………
    Lastly, before we get started… Although there are so many variations to the TEK (I will mention a few that I have tried along the way), trust me when I tell you that this TEK works. It may or may not be the best in every way… There may be others out there producing shit better than mine, but I simply don’t give a flying fuck… It produces the BEST METH that I have ever slammed or smoked in my life and me and my wife are extremely satisfied.
    OK… Here we go!
    Recommended Materials/Tools:
    ~ The tools that I use can obviously be substituted for others… Ex: You do not need baby food jars if you have a better or more convenient container for your acetone/Epsom and Isopropanol/Epsom mixtures when you put them in the freezer if you want to recrystallize, but I highly encourage you to use the chemicals that I list, or something equalor better in quality
    • 1 Box of 12-Hour or 24-Hour (2.4 gramsPseudoephedrine)o Can be Sudafed or any of the generics
    o Depending on the store and type, costs about $6 - $12
    • 1/2 – 3/4 cup Lye (Sodium Hydroxide – NaOH)
    o I use Roebic Laboratories Crystal Drain Opener from Lowe’s
    o Ace Hardware also has smaller containers of 100% Lye that are about $7
    o Costs about $16 with tax for a 2lb container
    • 1/4 – 3/8 cup Ammonium Nitrate Crystals (NH4NO3– AN)
    o I use the crystals from the inside of instant Ice compresses from The Dollar General
    § Most Instant Ice Compresses now are made with UREA… You need to get the AN.
    o Costs $1.50 for each Ice Compress
    o You will use about 1 per 2 cooks or so
    • 1/2 a bottle of Coleman’s Premium Camping Fuel
    o Red bottle at Walmart
    o Costs around $6
    o Look, I know this is going to hurt a bunch of vaginas out there so here’s the deal…
    § I used VM&P Naphtha for a while, but it’s a pain in the ass keeping that shit warm enough…especially through a thick ass Sodastream bottle
    § I also used Diethyl Ether for a bit, and it worked fine, I just got tired of having to empty the cans and doing the water wash with the shit.
    § I LIKE COLEMAN’S!!! If you don’t like that, guess you’ll probably live…
    ~Toluene, Xylene, Hexane, etc.
    • 1 Sodastream Plastic Bottle (500ml)
    o I buy a pack of 2 bottles at Walmart
    o Costs about $14
    o I reuse them a few times, although many others recommend against doing this, but I’m cheap and I haven’t had any problems.
    • 2 Energizer Advanced Lithium AA Bateries
    o I buy the 4 packs from Walmart
    o Costs about $6 for the 4-pack
    o Energizer Ultimate works as well but they are more expensive and the case is harder to cut through
    • A couple bottles of bottled water
    • Usually Around 30-50 drops of Muriatic Acid Solution 20% Muriatic to 80% Water (also called hydrochloric acid –HCl)
    o I buy at Lowes
    o 1 Gallon Jug
    o Costs about $8
    • Some Acetone
    o I buy at Lowes
    o I believe it’s around a quart, in a metal container, and it costs around $7
    • A pair of PVC Pipe Cutters
    o I got mine at Lowes
    o Cost around $10 or so
    o Will be using these to cut the casing off of the batteries
    • A couple pairs of plyers
    o One of these will be used to hold the battery while cutting the casing, and the other will be used to pull the “guts” out of the battery
    • A bunch of coffee enhancements
    • A couple of cotton balls
    • A blow-dryer
    • A grocery bags to use as a trash bag
    • A few 1 Quart ziplock baggies (I like the ones with the slide seals)
    • 2 Eye Droppers
    • Something to test PH
    o I use Phenyl Red Drops from a regular pool PH Test Kit (Gheto, but it works)
    • A mason Jar
    • A sewing needle
    • A plate to use as an evaporation plate
    • A Plastic Funnel
    • A blender
    • 1/4 Cup measuring cup
    • Any safety gear that makes you feel more secure (Kitty Litter, gloves, face mask, whatever)o I do recommend something to breathe through so that you do not inhale a bunch of Ammonia…That shit is nasty.
    o Honestly,I usually cook in the car or in my bedroom in boxers, but I know shit can go wrong, and that’s just stupid… Please, safety first.
    I know that it looks/sounds like a lot of shit, but don’t get discouraged… It will probably cost around $100-$150 for your first cook and around $20-$30 for each cook after that… You will likely yield between 1.5 – 2 grams of high quality meth that you can cut at least 25% if selling and still keep a very marketable product at $100 a gram, so you will have about $185 -$250 street value worth of product for each cook… Li(NH3)4 thinks this is apretty good Return on Investment, but Li(NH3)4 doesn’t care because he likes to abuse all of the product from ever cook with his wife
    OK… Now we are going to do an outline or “RECIPIE”of the actual procedure. I am doing it this way so that you can just follow a step by step process that’s not "too" wordy… Just make sure you understand what you are doing before you start… Trust me, this process is FUCKING EASY with VERY LITTLE DANGER “IF” you understand what you are doing… The only REAL DANGER is all the Damn Over-Zealous Hillbilly Geniuses that believe reading is for the city folk. Please don’t add to the ridiculously amplified misconception that this is a super dangerous procedure that will blow our innocent neighbors up… It’s bad publicity!
    Basic Procedure Outline:
    1. Place a layer of Epsom salt into a cookie sheet and bake in the oven at 400 degrees for about an hour or 2
    2. Crush the dry salt into a fine powder, and put about half an inch of the dry salt into each of the baby food jars
    3. Add acetone to one jar and isopropanol alcohol to the other jar, each about 3/4 full and place them both in the freezer
    4. Make sure your Sodawater bottle is completely clean and COMPLETELY dry
    5. Prepare an area to work, clean the area up, and have all the materials and tools easily accessible and organized in the work area
    6. Put your PSE pills into the blender, blend them until they are a fine powder, and put the powder into a small Tupperware container sealed with the lid
    7. Measure out 1/2 cup of Lye and put the Lye into a small Tupperware container sealed with the lid
    8. Measure out 1/4 cup of Lye and put the Lye into a small Tupperware container sealed with the lid
    9. Cut open the Instant Ice compress package, throw away the bag of water inside, measure out 1/4 cup of the AN crystals and put them into a Small Tupperware Container sealed with the lid
    10. Measure out 1/8 cup of the AN crystals (1/2 of the 1/4 cup measuring cup) and put them into a Small Tupperware Container sealed with the lid
    11. Pour about 1/4 of the bottle of Coleman’s fuel into a plastic Ziploc bag and keep bag handy for next step
    12. Remove Lithium Strips from 2 AA Batteries:
    a. Hold one end of a battery tightly with a pair of plyers
    b. Use PVC Pipe cutters with the other hand to cut through the battery casing
    i. Try to prevent cutting past the casing and into the “guts” of the battery as well as you can
    ii. Pinghat (I like him), suggested using a steak knife to saw through the casing without digging into the guts, then pulling casing apart…Probably a much easier way to attempt this, and I’m gonna give that shit a go next time
    c. Once the casing is cut all the way around the battery, set the cutter down and use the other pair of plyers to:
    i. Tightly hold the second end of the battery
    ii. Bend the battery back and forth with the plyers in each of your hands to ensure the casing is cut all the way through
    iii. While holding each end of the battery tightly with the plyers, pull the casing apart, and one side of the casing will come off exposing the “guts” of the battery
    iv. Discard the 1/2 battery casing that was removed and use the now free plyers to clamp on the exposed battery guts while still holding the casing with the other pair of plyers… now pull apart again and the “guts” will come free of the casing
    v. Place the “guts” directly into the fuel in the Ziploc baggie, and keep them submerged in the fuel as much as possible
    d. Repeat this process with the second battery
    e. Remove the excess air from the Ziploc baggie and seal it
    13. Add the 1/4 cup Tupperware container of AN to the RV using the funnel
    14. Add the 1/2 cup Tupperware container of Lye to the RV using the funnel
    15. Add the 2nd 1/4th of the bottle of Coleman’s fuel to the RV using the funnel
    16. Remove the Lithium strips from the Battery Guts:
    a. Open the Ziploc baggie containing the fuel and the battery guts
    b. Put your clean hands into the fuel and unroll the 1st roll of battery guts while keeping them submerged the entire time
    c. Locate the strip of Lithium (this will be the dull gray looking strip, not the blackand shiny silver strip)
    d. Remove the Li strip while still submerged in the fuel, and discard the rest of the battery “guts” into a grocery bag (be sure to also remove and throw away the shiny folded piece of metal that will be attached to the strip of Li at one end or the other)
    e. Repeatthe process for the 2nd roll of “guts”
    f. Now rip off a piece of Li maybe 3 inches long, and begin tearing it into small pieces that can fit through the funnel and into the RV (Doesn’t matter if they are flat, or balled up, or folded, just keep them relatively small)
    g. Repeat this process until all of the Li is in the RV
    17. Pour the fuel from the Ziploc bag into the RV using the funnel
    18. Remove the funnel and screw the lid onto the RV
    19. If the reaction is already building (Ammonia (NH3) bubbles emerging from the bottom layer of reactants and traveling to the top of the RV through the NP), by the time the cap is on…cool. If not, give the RV an easy swirl to get some of the reactants in the bottom to mix together and initiate reaction…
    20. Blow-dryer can be used at this point, and throughout the remainder of the cook to initiate/increase the reaction in the RV
    21. While holding RV with both hands, use your thumbs to “push In” on the center of the bottle to test internal pressure
    22. Try this push test all the around the bottle to find the spot that is easiest to push in, and make a mental note of where this spot is as it is the spot you will use for monitoring pressure throughout the cook
    23. Allow the reaction to continue while monitoring pressure until pressure builds high enough to warrant a pressure relief (Burp):
    a. These Sodastream bottles are beasts and can hold an incredible amount of internal pressure without failing, so don’t burp the RV until you are unable to push the bottle in whatsoever with the force of both of your thumbs pushing together
    b. The first burp will probably be needed about 2-5 minutes after the reaction starts really going but go by pressure, not by time
    c. After a few burps during the first 10-15min of good reaction, once everything slows a bit, you really only need to burp the RV a couple of times more prior to adding your PSE
  13. #33
    rollyourowncig Yung Blood
    24. When pressure reaches the threshold, burp the RV:
    a. Slowly loosen the cap on the RV just enough to let A VERY LITTLE bit of pressur eescape, and to get the reaction rolling strong again, and then close the cap
    b. There may be a whistling sound as the high pressure gasses are venting out of the RV…Good sign that you are letting the pressure build enough before venting
    c. You may even see NH3 gas shoot out of the cap like steam blowing out of the sides of an iron… Scary, but VERY good sign that you are building the kind of pressure that you want
    25. You should see little tiny Bronze beads start forming around the RV floating just on top of the NP mixed around with the Li within the first 10 minutes if everything is going well
    a. If the Bronze is not starting to appear within 10 – 15 minutes, it’s a pretty good indication that you are not allowing enough pressure to build in the RV, and you are either burping too early, too often, or both. No big deal... Just be observant and learn.
    26. Swirl the bottle and/or heat with blow-dryer as needed to keep the reaction continuing strong throughout this process
    27. Continue this process for probably about 25 – 45 minutes, (less burping and stronger ammonia reaction = quicker bronzing of Li = Less time… so Kinda hard to give you an accurate time frame here) until approximately 3/4 of the Li in the RV has been converted to Bronze
    a. The pink color in the fuel will dissipate over these initial 25-45min, and the clear fuel will get foggy as it becomes saturated with Li Bronze particles
    28. Slowly loosen the RV cap, vent all of the pressure, then remove the cap
    29. If the reaction is slowing down at this point, recharge the RV by adding the remaining 1/8 cup AN and then the remaining 1/4 cup of lye to the RV through the clean funnel. No more AN or Lye need to be added if the reaction is still going strong
    30. Add the PSE to the RV through the funnel slowly and then remove the funnel and screw cap back onto the RV
    31. Shake the fuck out of the bottle for about 10 seconds…
    32. Continue shaking the fuck out of the bottle as much as possible while continuing to regulate pressure with the blow-dryer and burping for the next 20-30 minutes
    33. The PSE must be based before the reaction can take place between the PSE and the Li, so it will be a bit (maybe 10-15 min. before you see the fuel start really going dark like chocolate milk)
    a. It is REALLY important to keep the pressure in the RV high, and the temp of the fuel as warm as you can during this time as it aides the reaction taking place between the PSE and the Li
    b. You will start seeing the fuel go dark after shaking the fuck out of the RV, and then go back to clear after the bottle settles
    i. This color change will likely happen many times
    ii. Sometimes the fuel doesn’t really go nearly as dark as other times… it’s ok… just keep going…
    34. Once you get to the point where you are able to shake the fuck out of the bottle, then set it down… and the fuel settles and goes back to clear in about 30-45sec, your cook is complete.
    a. You will still have some Li floating on top of the fuel, but it should be a very small amount compared to the original amount, and the remaining pieces will be thin and significantly reacted into bronze
    b. If you still have a significant amount of Li, don’t worry about it… Under-reacted product is still pretty decent, and you’ll get better next time
    35. Slowly loosen the RV cap and vent all of the pressure
    36. Prepare the funnel with the 2 cotton balls stuffed tightly into the stem, about 7 coffee enhancements in the funnel, and about a 1/2 inch layer of the dry Epsom in one of the middle coffee enhancements
    37. Use the prepared funnel to carefully enhancement the fuel by pouring it from the RV into the Mason Jar.
    a. Don’t fill the funnel more than about 1/2 way full at any time to prevent Particulates from getting over, around, or through the enhancements.
    b. As you are draining the fuel from the RV into the funnel, some of the Li and the reactants will also be poured into the funnel… This is fine.
    c. As the last of the fuel is in the funnel, agitate the pile of reactants and Li with a small wooden or plastic spoon or something similar that is clean and made of either wood or plastic to get trapped meth to move on with the fuel through the enhancements.
    d. Add a little more clean fuel to the enhancements in the funnel, agitate mixture again, and allow fuel to collect remaining meth to the mason jar
    e. Once the enhancements have no more fuel, remove them from the funnel, squeeze them over the funnel to get as much of the meth/fuel as possible, dump the inner contents that they contain into a plastic Ziploc baggie, and discard the enhancements
    f. Remove the cotton balls from the funnel, squeeze the fuel from them into the mason jar, and discard them
    38. Dump the contents of the RV into the same baggie with the rest of the reactants from the funnel, add a little clean fuel to this baggie, seal the baggie, and shake it around for 5 or 10 minutes to get as much of the trapped meth out of the reactants as possible.
    39. Repeat the enhancementing process as before enhancementing the new fuel from the baggie into the original fuel in the Mason Jar, but this time, once the fuel enhancements through, after squeezing the enhancements and the cotton balls to get the excess fuel, just throw the enhancements and cotton balls into the baggie with the rest of the reactants, seal it, and set it aside for disposal.
    • Water Pull
    o If you want to do gas Titration, please do it… Water pull is what I like…
    o If you have questions about Gassing, ASK ECSTACYBEANS… That dude loves to go on about Gassing…and on…and on…and on……..
    40. Add an equal amount of cold water to the fuel inthe Mason jar, put the cap on securely, and shake the fuck out of it for about 3-5 minutes to wash the fuel and remove certain impurities.
    a. Do not do this water cleaning if you are going to bang your dope as the sulfur impurities that you are washing away are the very things that provide that great fucking initial rush that takes your head outta this world when you get ahold of some good Banger’s Dope.
    41. Dump the Fuel/water mix into a plastic baggie, seal it, and then hang it from the wall by the corner of the bag with a tack
    42. Allow the layers to separate (Fuel will be on the top, and the dirty waste water on the bottom), poke a hole through the bottom corner of the baggie with the sewing needle and allow the waste water to drain into any container for disposal
    43. When the water is just about gone, switch the waste container for the Mason Jar and collect the fuel
    44. Repeat this washing process 1 more time
    45. After the 2nd water wash, pour the fuel from the Mason Jar into a plastic Ziploc baggie and add 1/4 cup of water.
    46. Use an eye dropper to add 1-2 drops of HCl acid to the fuel/water mix, shake it around for a minute
    47. Let the mixture settle and separate and obtain a sample of the water layer to test the PH
    a. Use a long eye dropper or a needleless syringe to access the water beneath the fuel layer
    48. Repeat this process until the PH of the water layer is between 6.8 and 7.2
    a. Use some kind of PH testing (Meter, strips, drops, whatever)
    b. When you start getting around 9 PH, just add one drop of HCL at a time, and retest PH after each drop
    i. It’svery easy to suddenly drop below target 7 PH and have dope that doesn’t smoke well
    ii. I want Y’all to do this part good so you can join me in Nagging Beans about our dope NOT being fucked up
    49. Let layers settle and separate, use a needle to poke a hole through the bottom corner of the baggie, and drain the meth/water solution onto your evaporation plate (Pyrex dish if you like)
    50. Pinch the hole in the corner of the baggie when the water is almost completely drained and then drain the fuel back into the Mason Jar
    a. Do not let any of the fuel pass through the drain hole onto the evaporation plate
    51. Repeat the water wash of the fuel, the addition of the 1/4 cup of water, the PH neutralizing (This time it will only probably need 2-3 drops of HCL total), and the collection of the water/meth once again to the same evaporation plate
    52. Use a blow-dryer and optionally a hot plate or non-gas stove to evaporate the water on the plate leaving a meth crystal layer on the plate
    53. Use a razor to scrape all of the meth into a pile
    54. You can abuse as you wish at this point
    a. The upcoming Acetone Wash will ensure that it burns cleanly on your foil or pizzle
    b. Youc an continue onto the recrystallization from there if you like, but it’s not necessary
    • Acetone Wash
    55. Allow meth to completely dry
    56. Crush meth crystals into a fine powder, and then put the powder into a shot glass
    57. Use an eye dropper to siphon some acetone from the jar in the freezer and add to the meth in the shot glass until the powder is well covered, swirl mixture for about 30 – 60 seconds, and then dump mixture onto a new clean evaporation plate…
    58. Hold the evaporation plate at a slight angle to allow the excess acetone to drain and collect at 58. Hold the evaporation plate at a slight angle to allow the excess acetone to drain and collect at the bottom of the plate with the dissolved impurities
    a. Save these nasty dissolved impurities to use as a cut on the shit you sell, or to smoke later when you’re in a bind as it will still contain some meth
    59. Scrape the remaining meth crystals out of the shot glass onto the plate with the rest of the meth using a knife, or razor, or whatever, and then clean the shot glass
    ReCrystalization
    60. Scrape together the clean meth crystals that did not dissolve into a pile, allow them to completely dry, and crush them into a fine powder, and add once again to the clean shot glass
    61. Use the CLEAN eyedropper once again to transfer the non-salt portion of the Isopropanol Alcohol from the jar in the freezer to a small saucepan and heat on stove until it starts boiling
    62. Use eyedropper to slowly add hot Isopropanol Alcohol to the meth in the shot glass
    a. Just enough so that the meth will completely dissolve.
    b. Stir...MA will dissolve...anything that doesn't is more impurity
    c. Siphon ISO/MA into 2nd shot glass carefully leaving solid impurities in first shot glass
    63. Heat ISO/MA till you just see first signs of film start to develop on surface.
    64. Remove from heat...add a drop or 2 more of ISO, add add a couple drops of Acetone for good measure, and allow to evaporate
    a. Freezer takes about 6 hours, produces smallest crystals
    b. Fridge = longer & bigger crystals
    c. Room temp = longest & biggest shards
    65. Carefully remove fragile crystals when they are no longer growing
    66. Give crystals, once completely dry, one last quick rinse with dry cold Acetone to remove surface impurities, and let completely dry one last time…
    • You now have beautiful crystal clear shards that will get you “NO” higher than the salt you started with, but they are pretty. Smoke them crystals, watch it run (clean as water with little to no trail), watch it crack back, it’s like Magic.

    That’s it.

    Sincerely, that’s as detailed with the steps as I can be…If you still can’t follow that, PLEASE just buy your dope off of someone that can!

    I wish you ALL the greatest of Success!

    Once again, the preceding post was a 100% hypothetical scenario that I generated based on the information that I’ve picked up reading this thread… I have never actually done any of the things listed in this thread, as they are illegal, and I do not want anyone else to do anything in this thread either as it is illegal. It is simply a fictitious story that I imagined.
  14. #34
    rollyourowncig Yung Blood
    https://darkages.intosanctuary.com/index.php?topic=285.0
  15. #35
    rollyourowncig Yung Blood
    Originally posted by Jiggaboo_Johnson Do you put it on your upper lip or your chest?

    I put it on My Chest, My entire back, My shoulders, My neck, My arms, My feet, My legs, My hips, and My ass. Never on My upper lip though.
  16. #36
    rollyourowncig Yung Blood
    Originally posted by Bradley my grandfather used to shove a little bit in his nostrils. Personally i rub it on my chest.

    My Grandmother used to put it on My chest too.
  17. #37
    rollyourowncig Yung Blood
    Originally posted by Rape Monster Try it on MDMA

    I have. It's amazing. Highly recommended.
  18. #38
    rollyourowncig Yung Blood
    Originally posted by Jiggaboo_Johnson I've never used it but figured rubbing it on your chest is pretty pointless if you have a chest infection…and inhaling it would make more sense.

    both methods are effective.
  19. #39
    rollyourowncig Yung Blood
    Originally posted by Bradley so a direct location where warmth comes off your body is the chest, the mustache is another go to, as your body heats and you're typically sleeping under a blanket when you use this product, the vapors coming off of it will be inhaled as your body is in proximity.



    it's not meant to help your chest infection by going through your rib cavity, dumbfuck.

    Yes. This.
  20. #40
    Originally posted by Jiggaboo_Johnson Well no, in the same quantity dumbo.

    It's easy to look on the back and see 20mg of XXX and see it's the same as the brand name one.



    is every ingredient, active and passive all in the same quantity and quality.
Jump to Top