Originally posted by Erekshun
Post it here, a lot of DH peeps here.
Some of DH peeps and most of the NIS fucks wish we would leave. This will be a ghost town if we do and then Lanny would probably shut this shitshow down.
The following users say it would be alright if the author of this
post didn't die in a fire!
Originally posted by snab_snib
i'm just trying to offer some realistic advice based on the information available to me. this is a known problem on those engines. most service advisers he talked to at a shop would just tell him to do the service, but unfortunately you have to factor in the value of the car itself against such a major repair.
something i forgot to mention is that while a shop or dealer may be 100% unwilling to ever do this… maybe you can just pound the old reluctor back into place if you do that chain yourself. MAYBE. it's possible.
She's married to a nigger.
The following users say it would be alright if the author of this
post didn't die in a fire!
Originally posted by snab_snib
you could be looking at a new engine, if that crankshaft is fucked. if you don't think you can pull the motor and do it yourself, which considering the tools you'd have to buy unless you're already equipped might not even save you much money, you might be better off just driving it till it dies, depending on what the car is worth, and other financial considerations. i don't think you really know if the reluctor has moved until you get the timing cover off… which means you don't know if you just need a new chain and guides, or a whole crankshaft and gear rebuild, until you're balls deep in it.
you might want to see if it can possibly come out the top/front with a hoist if you remove the hood and front clip. you'd have to put blocks of wood or a jackstand under the transmission and seperate it in place, so you'd at the bare minimum have to get some big ass stands to put the car on so you can slide up under it to work. without a lift and a full pro tool cart and air tools, it will be a huge undertaking. make sure a woman is watching so you get your moneys worth. you can definitely do the timing chain with the motor halfway out, but not the crank if the reluctor moved. i'm guessing that the MIL logic sets the code when the waveform on the crank hall sensor starts changing shape indicating the chain is loose and the teeth are not quite in position.
Jesus Christ! Do you know who you are talking to? Or are you advertising?
The following users say it would be alright if the author of this
post didn't die in a fire!
Originally posted by Netflxchillr
you fuq'n with me…?!! 4:20?? i only see 4:00, divide Egyptian sun dial??! by flipping 6 of the hypotenuse oygabtorem equilibrium… 🤨
yeah, you're fucking with my shit!!😖
you cruel BASTARD!!😣
c'mere
The following users say it would be alright if the author of this
post didn't die in a fire!
