User Controls
Come watch NASA Launch Luner Lander
-
2025-02-09 at 4:58 PM UTC
-
2025-02-09 at 9:04 PM UTC
Originally posted by Semiazas Blasphemous!
oh dont confuse Gay with FAGGOT
a faggot is a sissy weak person. we all said it in grade school in the school yards
thinking of the film where Willem defoe is in a gay seen but the gay dude wants to cuddle and he says "Oh dont be a faggot".
I had a highschool friend who was a bit closeted but I knew he was gay and we called each other faggots all the time. it just is.
Gay people trying to pretend they're going to franchise on the racism and bigoted scene but care little about oppression on middle class white males or agist is somehow acceptable. its not. I got fired for being too old to handle a job past 12 midnight
"He left his post" because I didn't want to get shot at 12 midnight delivering food and shit to someones house -
2025-02-09 at 10:05 PM UTC
Originally posted by Landy Pamm oh dont confuse Gay with FAGGOT
a faggot is a sissy weak person. we all said it in grade school in the school yards
thinking of the film where Willem defoe is in a gay seen but the gay dude wants to cuddle and he says "Oh dont be a faggot".
I had a highschool friend who was a bit closeted but I knew he was gay and we called each other faggots all the time. it just is.
Gay people trying to pretend they're going to franchise on the racism and bigoted scene but care little about oppression on middle class white males or agist is somehow acceptable. its not. I got fired for being too old to handle a job past 12 midnight
"He left his post" because I didn't want to get shot at 12 midnight delivering food and shit to someones house
Faggot, a bundle of sticks or twigs bound together as fuel.
Faggit, some gay nigga recruiting for NSCA men's college basketball.
https://www.ncsasports.org/mens-basketball-recruiting/indiana/fishers/hamilton-southeastern-high-school/nigga-faggit -
2025-02-09 at 10:09 PM UTC
George Hart
Wiarton, Ontario, Canada; george@georgehart.com
Abstract
This paper discusses “stick hyperboloids” and three geometric questions related to their construction. These are
physical structures made by assembling rigid physical rods that cross each other, creating an attractive model of a
hyperboloid of one sheet. First, some educational, architectural, and artistic examples are illustrated. Then
original results are explained concerning the spacing between the crossings, the angles for pre-drilling connector
holes, and what exactly happens when the structure is flexed. These results almost certainly were discovered
previously, but I could find no hint of them in the literature. In addition, I show a new form of paper hyperboloid
model that emerged from this analysis.
Introduction and Examples
The hyperboloid of one sheet is a classic surface in 3D space. [16] I will ignore the hyperboloid of two
sheets in this paper, so from here on “of one sheet” will always be implied. Figure 1a illustrates a finite
portion of this infinite hourglass. It is a quadric surface, so can be expressed as a polynomial equation in
the variables x, y, and z using exponents no higher than 2. A standard form is (x/a)2 + (y/b)2 - (z/c)2 = 1,
where the parameters a, b, and c determine its shape. A common special case is when a = b, making it
rotationally symmetric about the z axis, i.e., a surface of revolution with circular (instead of the generally
elliptical) “waist.” It can be generated by rotating a hyperbola about one of its mirror lines. Hyperboloids
are “doubly ruled” surfaces, meaning through each point of the surface it is possible to draw two distinct
straight lines entirely within the surface. One set of rulings is right-handed while the other is left-handed.
“Stick hyperboloids” are physical models, as in Figure 1b, that use rigid rods to reify these rulings. They
are visually engaging in part because they manifest the apparent paradox of being doubly curved surfaces
made of straight components.
Figure 1: (a) finite portion of a hyperboloid surface. (b) stick hyperboloid of skewers and rubber bands -
2025-02-09 at 10:12 PM UTC
Originally posted by the man who put it in my hood
George Hart
Wiarton, Ontario, Canada; george@georgehart.com
Abstract
This paper discusses “stick hyperboloids” and three geometric questions related to their construction. These are
physical structures made by assembling rigid physical rods that cross each other, creating an attractive model of a
hyperboloid of one sheet. First, some educational, architectural, and artistic examples are illustrated. Then
original results are explained concerning the spacing between the crossings, the angles for pre-drilling connector
holes, and what exactly happens when the structure is flexed. These results almost certainly were discovered
previously, but I could find no hint of them in the literature. In addition, I show a new form of paper hyperboloid
model that emerged from this analysis.
Introduction and Examples
The hyperboloid of one sheet is a classic surface in 3D space. [16] I will ignore the hyperboloid of two
sheets in this paper, so from here on “of one sheet” will always be implied. Figure 1a illustrates a finite
portion of this infinite hourglass. It is a quadric surface, so can be expressed as a polynomial equation in
the variables x, y, and z using exponents no higher than 2. A standard form is (x/a)2 + (y/b)2 - (z/c)2 = 1,
where the parameters a, b, and c determine its shape. A common special case is when a = b, making it
rotationally symmetric about the z axis, i.e., a surface of revolution with circular (instead of the generally
elliptical) “waist.” It can be generated by rotating a hyperbola about one of its mirror lines. Hyperboloids
are “doubly ruled” surfaces, meaning through each point of the surface it is possible to draw two distinct
straight lines entirely within the surface. One set of rulings is right-handed while the other is left-handed.
“Stick hyperboloids” are physical models, as in Figure 1b, that use rigid rods to reify these rulings. They
are visually engaging in part because they manifest the apparent paradox of being doubly curved surfaces
made of straight components.
Figure 1: (a) finite portion of a hyperboloid surface. (b) stick hyperboloid of skewers and rubber bands
How to make giant Chinese finger traps with bamboo skewers and hair braid bands.
-
2025-02-10 at 1:15 AM UTCIm super buzzed on weed right now. ate some gummies and they didn't kick in for about 90 minutes. then they hit me like 10 minutes ago and I'm starting to peak.
Plus I had a 24oz and bought some stickers off a hippy at the Berkeley-Free-Market on Telegraph. -
2025-02-10 at 1:20 AM UTC
Originally posted by Landy Pamm Im super buzzed on weed right now. ate some gummies and they didn't kick in for about 90 minutes. then they hit me like 10 minutes ago and I'm starting to peak.
Plus I had a 24oz and bought some stickers off a hippy at the Berkeley-Free-Market on Telegraph.
fat drunk and stupid
-
2025-02-10 at 1:24 AM UTC
-
2025-02-10 at 1:39 AM UTC
-
2025-02-10 at 1:40 AM UTCHe got an order come in after the Witching Hour and bailed.
-
2025-02-10 at 2 AM UTC
-
2025-02-10 at 3:14 AM UTC
-
2025-02-10 at 3:19 AM UTC
Originally posted by Speedy Parker Translation: He's a chicken shit pansy.
Fuck off. You can't just carry a gun in self defense in a car at work because the NDA and rules state so.
I mean part of San Mateo county is super fucking dark at night. pitch fucking blacl. Cell phone flashlight the entire time and it being at 7% and plugged in between drop offs. even had to sit for 15 minutes to catch up. phone drained too fast. People coming out with a bat saying "Do you know its past 12 midnight. something something delivery is illegal after 10pm (which isn't a law but standard courtesy. like with UPS)
you think you're such a fucking bad ass. i was dropping shit off in the hood in East Palo Alto which isn't the college side. Working class and some former gangs living there. I had to be super fucking silent with a fucking 2 wheel truck and cases of bottles. also Alcohol is rare but they serve it and I can't just leave it without an adult signing and checking ID
lots of shit go into it you fucking moron. I would think a Restaurant owner knows the drill. -
2025-02-10 at 3:32 AM UTC
-
2025-02-10 at 3:38 AM UTC
-
2025-02-10 at 7:42 PM UTC
-
2025-02-10 at 8:39 PM UTC
-
2025-02-10 at 9:37 PM UTCI can imagine Woz in the Mr. Dressup role.
-
2025-02-10 at 10 PM UTC
-
2025-02-10 at 10:10 PM UTCdeflecting off the fact you wouldn't do shit if confronted out here. because the rules apply against the innocent.
things are changing slightly. the far left scene is getting called out even by liberals not so far left. the more level headed people.
also 200 cases with about 50-60 fucking deliveries in 4 hours ending up 7 and overtime. traffic, dark narrow and winding roads up steep grades and back down.. having to adjust your driving for stopping time, Uppity rich people and have to read special instructions on how to get in their gated properties and then back into a uptight hooded area.
I should have called OSHA on the company that fired me because the driver doors on some were janky af, some didn't open at all so I had to climb over boxes to get out the side door of the delivery van, windshields all cracked, balding tires, shitty brakes.
they would buy their vans off of CarMax and not fix them to standards. hilarious as fuck. small company trying to grow but falling in the Red
