User Controls
Building a Pallet house
-
2019-07-29 at 2:56 AM UTC
Originally posted by A College Professor just buy a school bus thats the best way to get a house
That really does work. I knew a guy that laid one out inside. He patch the windows with sheet metal and brazing. Framed the inside with 1 x 2 for nailers. Closed up the inside with tongue in groove cedar and trimmed it in juniper. The thing was pretty sweet. -
2019-07-29 at 3:10 AM UTC
Originally posted by vindicktive vinny using a dremel to grind away the top of the nails is the best way to salvage the pallet woods in their best condition.
you just grind away the head of the nails, take the pallet apart and then pull whats left of the nail with a plier.
it'd get expensive for someone homeless, grinding down metal means you'll have to replace the heads fairly regularly
Originally posted by Speedy Parker That really does work. I knew a guy that laid one out inside. He patch the windows with sheet metal and brazing. Framed the inside with 1 x 2 for nailers. Closed up the inside with tongue in groove cedar and trimmed it in juniper. The thing was pretty sweet.
there's a group that used them for underground bunkers, apparently they work quite well if you don't dig too deep
http://webpal.org/SAFE/aaaarktwo/The following users say it would be alright if the author of this post didn't die in a fire! -
2019-07-29 at 3:20 AM UTC
Originally posted by aldra it'd get expensive for someone homeless, grinding down metal means you'll have to replace the heads fairly regularly
That's pretty wild.
there's a group that used them for underground bunkers, apparently they work quite well if you don't dig too deep
http://webpal.org/SAFE/aaaarktwo/
-
2019-07-29 at 3:32 AM UTCYeah hydro just do that^The following users say it would be alright if the author of this post didn't die in a fire!
-
2019-07-29 at 8:21 AM UTC
Originally posted by Speedy Parker I've already presented my intelligent argument for using the right tool for the right job. You have not articulated an intelligent reason to just use any old tool laying around when the right tool is available.
just like how the military industrial complexes had convinced americans that foreign wars and interventions are good for the country,
the tool industrial complexes, both powered or non-powered, had successfully sold americans the lie that it is important to use the right tool for the right job, so that they spend ¾ of their paychecks on tools that are unnecessary.
black cat, white cat, or a dog who self identifies as a cat, if it catches rats, is a good cat. -
2019-07-29 at 8:24 AM UTC
Originally posted by aldra it'd get expensive for someone homeless, grinding down metal means you'll have to replace the heads fairly regularly
tungsten carbide borr such as these
works thru mild iron like hot butter thru knives. and because tungsten carbides are harder than mild iron, it practically lasts forever.
and they're cheap even by 3rd world standards. -
2019-07-29 at 8:27 AM UTC
-
2019-07-29 at 8:28 AM UTC
Originally posted by NARCassist don't be fucking retarded. if you want nice wood finish furniture you don't make it out of pallets ffs. if you make furniture with pallets then you'd use paints and primers to have a decent finish. unless you live in a crack house in which case it wouldn't matter anyway, just pile up a few pallets and just sit on them, nobody would give a fuck.
.
but thats not treehuggers friendly. -
2019-07-29 at 11:58 AM UTC
-
2019-07-29 at 12:13 PM UTC
Originally posted by vindicktive vinny just like how the military industrial complexes had convinced americans that foreign wars and interventions are good for the country,
the tool industrial complexes, both powered or non-powered, had successfully sold americans the lie that it is important to use the right tool for the right job, so that they spend ¾ of their paychecks on tools that are unnecessary.
black cat, white cat, or a dog who self identifies as a cat, if it catches rats, is a good cat.
That is an analogy not an argument. Try again. -
2019-07-29 at 4:01 PM UTC
-
2019-07-29 at 4:03 PM UTC
-
2019-07-29 at 4:08 PM UTCSpeedy runs from discussions because he has no valid points to make. It's typical of white Republicans
-
2019-07-29 at 4:10 PM UTC
Originally posted by G4LM Speedy runs from discussions because he has no valid points to make. It's typical of white Republicans
Take up the tool argument. Tell me why you think it is better to use any tool on hand than to use the right tool for the right job. By tools we are talking about a device or implement, especially one held in the hand, used to carry out a particular function. Go... -
2019-07-29 at 4:23 PM UTC
Originally posted by Speedy Parker Take up the tool argument. Tell me why you think it is better to use any tool on hand than to use the right tool for the right job. By tools we are talking about a device or implement, especially one held in the hand, used to carry out a particular function. Go…
its really a culture thing.
we chinese prefer simplicity like how our 97.63% of our foods can be dealt with with chopsticks and soup spoons,
while a full course western food, especially french, would require an array of surgical tools involving spoons of all size and knives of all curvature and some of them implememts i dont even know what their name is.
ditto with paintings. -
2019-07-29 at 4:31 PM UTC
Originally posted by vindicktive vinny its really a culture thing.
we chinese prefer simplicity like how our 97.63% of our foods can be dealt with with chopsticks and soup spoons,
while a full course western food, especially french, would require an array of surgical tools involving spoons of all size and knives of all curvature and some of them implememts i dont even know what their name is.
ditto with paintings.
Culture has nothing to do with the argument at hand. Please confine your debate to the topic of which is more effective. The right tool for the right job or any tool you have laying around for whatever job you face. -
2019-07-29 at 4:39 PM UTC
Originally posted by Speedy Parker Culture has nothing to do with the argument at hand. Please confine your debate to the topic of which is more effective. The right tool for the right job or any tool you have laying around for whatever job you face.
the latter is more cost and time effective.
material effective even. -
2019-07-29 at 4:43 PM UTC
-
2019-07-29 at 4:45 PM UTC"we chinese"
>obviously doesn't speak Chinese
>admits he isn't Chinese
"we chinese"
You're a waiguoren just like me
Go ahead and plug that shit into yabla or pleco maybe you'll get a coherent response -
2019-07-29 at 4:47 PM UTC
Originally posted by Speedy Parker That is a statement not an argument. Now back that statement with data to support it and you may just form an argument.
if you cant see the cost savings gained from having to buy only one tool as opposed to having to buy two,
them no amount of data can help you see because your logically blind.
