User Controls
How to learn to cook meth Part 1 - The Shake and Bake.
-
2016-12-09 at 2:03 AM UTC
Originally posted by bling bling calm down noob
if you dont stop saying that im gonna tell on you -
2016-12-09 at 2:26 AM UTCscrwny i giv u permision to do whatever u wont
-
2016-12-09 at 2:37 AM UTC
Originally posted by bling bling scrwny i giv u permision to do whatever u wont
who you calling scrawny boy
im only 18 and i'm 6'3", 265lb, and my weiner is a respectable 6.5" -
2016-12-09 at 8:29 AM UTCLOL!!!! scrawn!! sc!!!!! ... honestly cook it anyway you want.. I do mine so slow it would drive you absolutely mad. People at work want to cut my throat i go so slow but I dont make mistakes so I get bumped up.
The end result from the effort Applied.
You can just crush pills and one bottle SnB for low yield trash
or
take the tinne and extract the pseudo and condense ammonia like in the videos I posted and do a clean reduction to yield nice pure methamphetamine which can be crystalized for the best shit anyone has ever seen made from pills, fertilizer, lye, solvent and batteries.. that all it takes!!!!! the end product is entirely up to you..
-
2016-12-09 at 3:43 PM UTC
Originally posted by SCronaldo_J_Trump LOL!!!! scrawn!! sc!!!!! … honestly cook it anyway you want.. I do mine so slow it would drive you absolutely mad. People at work want to cut my throat i go so slow but I dont make mistakes so I get bumped up.
The end result from the effort Applied.
You can just crush pills and one bottle SnB for low yield trash
or
take the tinne and extract the pseudo and condense ammonia like in the videos I posted and do a clean reduction to yield nice pure methamphetamine which can be crystalized for the best shit anyone has ever seen made from pills, fertilizer, lye, solvent and batteries.. that all it takes!!!!! the end product is entirely up to you..
i dont have the equipment. about as far as i'd go with it is extraction of the PSE -
2016-12-09 at 3:44 PM UTC
Originally posted by cerakote who you calling scrawny boy
im only 18 and i'm 6'3", 265lb, and my weiner is a respectable 6.5"
Originally posted by SCronaldo_J_Trump LOL!!!! scrawn!! sc!!!!! …
im fucking retarded -
2016-12-10 at 5:09 AM UTC
Originally posted by cerakote i dont have the equipment. about as far as i'd go with it is extraction of the PSE
you don't need much besides some glass and tubing. -
2016-12-13 at 10:23 PM UTCI am studying this thread and have a question. I have a friend that says if it dont look like glass shards it aint any good. What are your thoughts about that as the pics in this thread show the result as being a powder? No disrespect intended. I have never tried either forms personally. How would one end up getting the glass shards my friend speaks of using the guide in this thread?
Post last edited by plumpkatt1 at 2016-12-13T22:41:02.397834+00:00 -
2016-12-14 at 12:57 AM UTC
Originally posted by plumpkatt1 I am studying this thread and have a question. I have a friend that says if it dont look like glass shards it aint any good. What are your thoughts about that as the pics in this thread show the result as being a powder? No disrespect intended. I have never tried either forms personally. How would one end up getting the glass shards my friend speaks of using the guide in this thread?
Post last edited by plumpkatt1 at 2016-12-13T22:41:02.397834+00:00
You won't get glass from a shake and bake using ground up pills. Cleaning the pills is the hardest step and shake and bake is the worst reaction possible which is why nobody wastes time cleaning pills for such a ghetto reaction. You get methamphetamine Hcl with all the pills and binders + god knows what else.
You can clean it up a few times, there is some research about removing CMP contaminant. You can dissolve in acetone and try to recrystallize.
If you use pure pseudoephedrine/ephedrine you will get glass from shake and bake which can be cleaned to high purity easily because no pill contaminants are there.
If your gonna go to the work of cleaning pills you might as well also condense the ammonia to make it anhydrous which will increase yield from 30% to 80% and it doesn't cost much more, just takes lots of ammonium sulfate and lye.
Post last edited by SCronaldo_J_Trump at 2016-12-14T00:59:15.175219+00:00The following users say it would be alright if the author of this post didn't die in a fire! -
2016-12-14 at 5:23 AM UTCI found this article to I copy n pasted it here. I assume this is talking about the 12 hour 120mg Sudafeds?
Update to Pearls of Wisdom......
Doc talked to Homer and Homer said that Pearls was a complete success 95-100% recovery dnt know if it works on those other lil whit bastards or his red sister but for 120s it's ago!So enjoy kids it's a brave new world and we are it's pioneers!
Posted by The Doctor at 3:27 AM No comments: Links to this post
Thursday, February 12, 2009
120 Those Little White Bastards.(Pearls of Wisdom)
On one Doc's many adventures in cyberland he came across another stary eyed explorer named MnkyBoy and he had this wisdom to share with us it is as follows!
MnkyBoy's Cracked Pearls (Tomb-stones)
If one was to come across several 120 mg/12 hr decongestants (aka Pearls), a simple task to crack the shells to get at the pearls inside is to use acetone.
* With the pills freshly removed from their vacuum-packed slumber place into a WIRE MESH food strainer. (Use a strainer that isn't to fine, nor to coarse)
* Place the strainer inside a bowl deep enough so that the pearls are below the top of the bowl
* Take DRY acetone and proceed to pour enough over the pearls so that they are covered with an excess of about 1/2 inch tone
* After a minute or so one will notice that the pearl shells are split open and the pearl meat is starting to fall out. Now raise and lower the strainer in the tone. The pearl meat should be falling through the strainer to the bottom of the bowl.
* After a few dunks, start sifting the shells in the strainer LIGHTLY. Do not press or force the hulls through the strainer.
* Discard the spent hulls.
* Decant the tone which is a milky/whitish color and add a bit more tone, enough to cover the pearl meat. Swirl around for a bit and then decant the tone.
* Tap the bowl on the counter to dislodge excess tone and decant this tone.
* DO THE FOLLOWING EXACTLY AS STATED FOR OPTIMAL EFFECTIVENESS: Set the tone wetted pearl meat aside with a fan lightly blowing ACROSS the top of the bowl or at a slight angle.
* WALK AWAY
* After about a half hour check the contents of the bowl. Notice a top skin layer? Is it cracking? Carefully check the underlying powder to see if it is still saturated with tone. If so let it dry longer. If it is dry, carefully remove the plastic skin layer from the top of the powder. Discard. (Or use it at the park next time as a frizbee). If after extracting the e from the PM, yields are low, check the skin you pealed off. If the tone was wet, this skin can contain some e. Hint: That's why the DRY tone.
* Do with the fine powder as one wishes.
I think we can learn alot frpm our friend MnkyBoy,but the real trick is to not have to use E in the first place!Brought to you by the good doctors of MA land! -
2016-12-14 at 5:50 AM UTCIn this Tek of yours, You show Ammonium Sulfate as the ingredient. Is that used if you dont have anhydrous ammonia? Sorry if this is a silly question. I think it is silly to not ask though. Im trying to learn the reasoning behind the different steps.
-
2016-12-14 at 6:44 AM UTC
Originally posted by plumpkatt1 I found this article to I copy n pasted it here. I assume this is talking about the 12 hour 120mg Sudafeds?
Where are you getting all these write ups?. I have never seen any of these and I've been reading this stuff for almost a decade.
I have no idea what thats supposed to be but my guess is that its some way to remove the coating from pills? not really an extraction. If they have a dye or annoying coating you can try soaking them in solvent before crushing them.
The best extraction for sudafed in 2016-17 is the tetra trap.
http://chemistry.mdma.ch/hiveboard/crystal/000468062
Originally posted by plumpkatt1 In this Tek of yours, You show Ammonium Sulfate as the ingredient. Is that used if you dont have anhydrous ammonia? Sorry if this is a silly question. I think it is silly to not ask though. Im trying to learn the reasoning behind the different steps.
There are different kinds of ammonia.
Ammonium Sulfate, 21-0-0 sold as 25kg bags for use as nitrogen fertilizer, also has some sulfur. Very cheap in large quantities and not watched like ammonium nitrate
Ammonium Nitrate, 34-0-0 sold as 25kg bags fertilizer or in COLD PACKS with small amounts. Unless you can get lots of it cheaply I don't recommend it, this stuff is a watched EXPLOSIVE chemical precursor
Anhydrous Ammonia, 88-0-0, R-717 Refrigerant. Sold in pressurized tanks for use in corn fields in farms where high amounts of nitrogen are needed or where the soil is depleted. Very popular meth precursor in Midwest United States so its hard to get there but otherwise its unwatched pretty much everywhere else on the planet. It's also very easy to get as ORGANIC NON POLLUTING refrigerant gas sold as R-717
Post last edited by SCronaldo_J_Trump at 2016-12-14T06:56:38.273744+00:00The following users say it would be alright if the author of this post didn't die in a fire! -
2016-12-14 at 10:02 AM UTCWow, those videos are disturbing. I used to grow mushrooms years ago and was DAMN good at it.I however spent months of researching all aspects of it by scouring the Internet reading all I could. I have been doing that all I can with this topic. I just connect to a VPN to hide my IP addy and search n search n search some more. I'm just trying to get an understanding b4 go any farther.
Hell, if I could learn to make myself my own personal stash of LSD I would go for it........ I used to get liquid in the late 90's. I has 3 sweet breath bottles of liquid stashed for myself. My buddies were pissed cause they knew I had it and they couldnt get me to sell any of it.I let em talk me into coming off a partial bottle of it and that was it. I knew once it was gone it was gone. Good stuff hasnt come along since and that stuff I saved for myself was really good. -
2016-12-17 at 5:33 PM UTCIf one was to follow this guide of yours, how much of a reaction is there? In other words, How big of a cloud comes off the bottle as you burp it? Also, since it's about winter time, can this be done outdoors with the really cold temps?
-
2016-12-17 at 8:34 PM UTCIt can ONLY be done outdoors really.. you can do it inside or around people but it stinks really bad, very rarely will you be able to get away with it.
It doesn't really smoke or anything but each time you burp it will release ammonia gas into the atmosphere around you. I don't feel comfortable doing the reaction in a city or near people. It's mostly popular in rural areas because you can go into the woods and make it. Or maybe your house is just really isolated from people and your only neighbor is a mile away.
The following users say it would be alright if the author of this post didn't die in a fire! -
2016-12-17 at 9:22 PM UTCYeah, I saw that video. So doing this in freezing weather wouldnt be an issue? If it was to be tried, a friends apartment is on the second floor and on the back side of the place there is a private porch. If it is just smell I dont think it would b an issue. The closest neighbor is around the side of the building downstairs. It would b in a small town. Im just concerned with the freezing weather.
-
2016-12-18 at 4:03 AM UTCApartment is a Bad idea lolThe following users say it would be alright if the author of this post didn't die in a fire!
-
2016-12-18 at 4:33 AM UTCIt isnt an apartment in the traditional sense. It,s the second floor of a long house. The back door goes out to a deck that is not has no stairs. It's fairly secluded and nobody is home during the day. My buddy suggested going out into the woods but it is only like 32 degrees or colder outside. Will that hurt the reaction? And how long do u think we would be stuck out in the cold?
-
2016-12-18 at 6:50 AM UTCTemperature wont affect the reaction as much as water.The following users say it would be alright if the author of this post didn't die in a fire!
-
2016-12-18 at 7:52 AM UTC
Originally posted by SCronaldo_J_Trump Temperature wont affect the reaction as much as water.
Thanx. That's good to know. In your experience, how long does it normally take from the time of adding your lithium strips to getting to the gassing stage? I have been reading various guides and some say as little as 45 minutes and some say up to 5 hours.
Also, I assume in the colder temperatures of winter there will be less humidity so that should bake things a but safer as less humidity means less moisture in the air to react with the lithium strips?
Post last edited by plumpkatt1 at 2016-12-18T07:59:38.601906+00:00
