2015-06-27 at 2:15 AM UTC
How long would 20$ of crack last? How do you smoke it? Can you smoke crack out of a lightbulb?
2015-06-27 at 3:46 AM UTC
-SpectraL
coward
[the spuriously bluish-lilac bushman]
About 10 minutes. Freebase it in a pipe.
2015-06-27 at 7:58 AM UTC
Sploo, please please do it in TinyChat and (have someone) record it if you do. Your first time on crack needs to go down in history!
2015-06-27 at 2:57 PM UTC
Can't imagine smoking crack from a lightbulb, I think it needs direct heat. A $20 should be about two good hits, duration of each depends on user but I wouldn't expect a 20 to last longer than like 30-40 minutes if that.
2015-06-27 at 3:25 PM UTC
Gut a tire pressure gauge, then you're going to want to buy this stuff called "Chore Boy" it looks like a copper brillo pad, Cut pieces of this off and stuff it tightly enough into the tire gauge so it doesn't move without force. Make sure there is about an 1/8th of an inch between the top of the gauge, just enough to place the rock in, hold it upright so your rock doesn't fall out and light that shit up. A 20 rock is going to be gone in no time though.
2015-06-27 at 3:29 PM UTC
2 grams barely lasts friday to sunday night so $20 worth might be good for like a single hoot.
2015-06-27 at 3:42 PM UTC
fuck you beat me to it, rest stop
20 dollars worth is either 4 normal hits or two big blasts.
Like rest stop said, get a tire gauge, knock out the guts, and get a piece of brillo about the size of a dime. It has to be copper brillo without the soap shit in it.
Roll the brillo into sort of a cylinder and put it in one end of the tire gauge. Don't make the brillo flush with the end, make sure it is recessed a few millimeters, that is where the crack goes.
Try to 'dry hit' the pipe a few times to make sure there is airflow. You don't want to have a clogged pipe and waste the crack.
Put a 1/4 of the crack into the recessed end, and put a lighter to it just long enough so that it sort of 'melts' onto the brillo. This will keep the crack from falling out once you put the pipe horizontal.
Now is the tricky part....for me...because there is a certain way you 'hit' the pipe that makes it most effective, and I wonder if I can put it into words in a way that you will get it.
You don't want to hit it or light it like a normal pipe, you cycle the flame on and off the end of the pipe so you sort of vaporize the crack, but it isn't fragile like you would think something vaporized should be, like you can hold the flame onto the crack for two seconds or so and then let off it for a second, then on for two seconds, then off for one...
While you are cycling the flame, you want to sort of 'puff' on the pipe, don't hit it smoothly like it is weed. For the first hit, you apply flame for two or three seconds until you see a bit of smoke...while the flame is on the end, exhale out of the corner of your mouth, preliminary to the hit. Then, whenever the flame is on the crack, 'chief' on the pipe so it makes a sort of 'poi' sound, then let off when the flame is off. keep 'poi-ing' until your lungs are full, then hold it as long as you can.
As you exhale, you will feel the magic of crack cocaine flow through you, and somewhere in Heaven Rick James is smiling down on you.
Later I may type up a short paragraph about 'push hits'.
2015-06-27 at 3:45 PM UTC
fuck you beat me to it, rest stop
20 dollars worth is either 4 normal hits or two big blasts.
Like rest stop said, get a tire gauge, knock out the guts so that it is just a metal cylinder, and get a piece of brillo about the size of a dime. It has to be copper brillo without the soap shit in it.
Roll the brillo into sort of a cylinder and put it in one end of the tire gauge. Don't make the brillo flush with the end, make sure it is recessed a few millimeters, that is where the crack goes.
Try to 'dry hit' the pipe a few times to make sure there is airflow. You don't want to have a clogged pipe and waste the crack.
Put a 1/4 of the crack into the recessed end, and put a lighter to it just long enough so that it sort of 'melts' onto the brillo. This will keep the crack from falling out once you put the pipe horizontal.
Now is the tricky part....for me...because there is a certain way you 'hit' the pipe that makes it most effective, and I wonder if I can put it into words in a way that you will get it.
You don't want to hit it or light it like a normal pipe, you cycle the flame on and off the end of the pipe so you sort of vaporize the crack, but it isn't fragile like you would think something vaporized should be, like you can hold the flame onto the crack for two seconds or so and then let off it for a second, then on for two seconds, then off for one...
While you are cycling the flame, you want to sort of 'puff' on the pipe, don't hit it smoothly like it is weed. For the first hit, you apply flame for two or three seconds until you see a bit of smoke...while the flame is on the end, exhale out of the corner of your mouth, preliminary to the hit. Then, whenever the flame is on the crack, 'chief' on the pipe so it makes a sort of 'poi' sound, then let off when the flame is off. keep 'poi-ing' until your lungs are full, then hold it as long as you can.
As you exhale, you will feel the magic of crack cocaine flow through you, and somewhere in Heaven Rick James is smiling down on you.
Later I may type up a short paragraph about 'push hits'.
2015-06-27 at 3:55 PM UTC
-SpectraL
coward
[the spuriously bluish-lilac bushman]
If you need a good pipe in a hurry...
1. Take an empty toilet paper tube.
2. Block one end by wrapping a rubber band around one end of the tube over tin foil or stuff something in there.
3. Cut a small, round hole near the blocked end of the tube.
4. Unscrew the end of a sink faucet and remove the round, wire-mesh enhancement there and press it down into the pipe hole.
5. Lay a bit of tobacco in the bottom of the wire-mesh enhancement.
6. Place the rock on the bed of tobacco.
7. Get high.
p.s Don't forget Step 7, as it is the most important step of the process. Repeat, if necessary.
2015-06-27 at 4:07 PM UTC
No disrespect spectral, but that sounds like a monumental waste of good crack. It will just melt all over and through the tobacco, and drip down into the tube.
2015-06-27 at 4:11 PM UTC
I have seen people use 'pop can bowls' with tobacco or whatever on them, but fuck, it wastes a lot of crack that way. I seen niggers openly smoking on their pop cans at the bus station, sitting inside those glass bus bench things to get away from the wind.
2015-06-27 at 4:21 PM UTC
Ah, after rereading your post, does the screen sort of serve as an 'ad-hoc' brillo? I was just thinking itobacco on some foil with holes poked in it.
2015-06-28 at 3:34 AM UTC
It may be quick and use easily available household items, but the way I described gives you the best hits and lets you get the most out of your crack.
2015-06-28 at 7:36 AM UTC
lol spectral is addicted to crack
this explains so much
2015-06-28 at 10:32 AM UTC
-SpectraL
coward
[the spuriously bluish-lilac bushman]
I haven't done any coke in years. Used to do a ton of it, though.
