User Controls
Explosives in the World Trade Centre Towers
-
2021-09-16 at 11:07 PM UTCLook at the blinds Aldra. think of them at night on a full moon and they will peer into your windows. through the blinds. not curtains or nothing there. they are attracted to blinds. I saw them last night. you just have to believe and they will come
-
2021-09-17 at 12:46 AM UTC
-
2021-09-17 at 12:49 AM UTCDeflectors Projecting the false narrative again.
-
2021-09-17 at 1:04 AM UTC
-
2021-09-17 at 1:05 AM UTC
-
2021-09-18 at 2:41 AM UTC
-
2021-09-18 at 4:44 AM UTCI dont know how we could have 2 fucking states of Washington. and it cant be Washington DC if it's a state. why not just call it the state of Columbia
Im glad that got passed down. -
2021-09-18 at 5:34 AM UTCits maryland you tard
-
2021-09-18 at 3:54 PM UTC
-
2021-09-18 at 4:05 PM UTC
-
2021-09-18 at 4:23 PM UTC
-
2021-09-18 at 4:24 PM UTCalso
-
2021-09-18 at 4:36 PM UTC
Originally posted by Jiggaboo_Johnson Structural engineers disagree with you two lunatics.
Actually they don't.
https://www.ae911truth.org/
Don't dismiss the link, go there and look at the qualifications of the members. -
2021-09-18 at 4:38 PM UTC
Originally posted by ⠀⠀⠀⠀⠀⠀
How did they rig them with thermate ?
If that's what was used.
People don't know this but the buildings were 3 buildings stacked on each other. Like 35-36 floors each. With 2 floors of maintaince rooms between each 3rd sections. So floor 37 and 38 would not be numbered where as floor 39 would be floor 37 on the next level. I don't know if my floors are correct in numbering but the elevators would start again and each section of thirds.
Floor 1, 37, 74 ( though I might he wrong with exact floor numbering) would have elevator transferring points. Only maintenance or service elevators went from garage basement all the way up to 110 and a attic of floor above 110.
The bottom third section had much larger I beams and cross members (H beams?) Then section two and section 3. Each section needed less steel for support.
So this is why the resistance should have been greater and greater while at the same time the load of office floors and all of the furnishings had blew out sideways far away from the structure throwing cross beams a football field length away destroying building 4,5 and 6. While building 7 was much farther
Why didn't the buildings slow and stop during the collapse. Kenetic energy was ruled out. So you can't use the runaway collapse theory.
I don't know how the buildings were rigged. Maybe high energy lasers cut through every few floors. Just enough to then pack them with thermate and explosives. But clearly Silverstein purchased an expensive fix not worth what he paid. It required shitloads of asbestos removal. -
2021-09-18 at 4:43 PM UTCHe didn't really buy them, I think these were 99 year leased. The land was or is owned by the Port Authority.
Biggest insurance scam ever involving murder -
2021-09-18 at 4:43 PM UTC
Originally posted by Quick Mix Ready How did they rig them with thermate ?
If that's what was used.
People don't know this but the buildings were 3 buildings stacked on each other. Like 35-36 floors each. With 2 floors of maintaince rooms between each 3rd sections. So floor 37 and 38 would not be numbered where as floor 39 would be floor 37 on the next level. I don't know if my floors are correct in numbering but the elevators would start again and each section of thirds.
Floor 1, 37, 74 ( though I might he wrong with exact floor numbering) would have elevator transferring points. Only maintenance or service elevators went from garage basement all the way up to 110 and a attic of floor above 110.
The bottom third section had much larger I beams and cross members (H beams?) Then section two and section 3. Each section needed less steel for support.
So this is why the resistance should have been greater and greater while at the same time the load of office floors and all of the furnishings had blew out sideways far away from the structure throwing cross beams a football field length away destroying building 4,5 and 6. While building 7 was much farther
Why didn't the buildings slow and stop during the collapse. Kenetic energy was ruled out. So you can't use the runaway collapse theory.
I don't know how the buildings were rigged. Maybe high energy lasers cut through every few floors. Just enough to then pack them with thermate and explosives. But clearly Silverstein purchased an expensive fix not worth what he paid. It required shitloads of asbestos removal.
No directed energy weapons required. 5000 people per building? A couple of operatives looking like maintenance drilling holes in support structures in order to place demolition charges doesn't raise any eyebrows, i can tell you that for a fact. If you look like you're not out of place and appear to be doing what people expect you are doing you will not be noticed.
Experience with social engineering and physical security has granted me this insight. -
2021-09-18 at 4:47 PM UTC
Originally posted by Sophie Actually they don't.
https://www.ae911truth.org/
Don't dismiss the link, go there and look at the qualifications of the members.
just because theyre expert building construction engineers doesnt mean that they are expert buildimg destruction engineers.
the same way your normal healer doctors wouldnt be able to tell you the actual cause of death of any specific body. -
2021-09-18 at 4:59 PM UTC
Originally posted by Sophie No directed energy weapons required. 5000 people per building? A couple of operatives looking like maintenance drilling holes in support structures in order to place demolition charges doesn't raise any eyebrows, i can tell you that for a fact. If you look like you're not out of place and appear to be doing what people expect you are doing you will not be noticed.
Experience with social engineering and physical security has granted me this insight.
That was a story floating about. That 2-3 weeks earlier they had closed the buildings to do some major work. As well as an entire floor was emptied out?
Then the "Dancing Israelis" pulled over had in fact occupied some floors for an Avan Garde project and removed a window and had visitors feel as if they were leaning out while a paid copter pilot taking photos.
There are boxes labeled BB44 or 22 or whatever which were said to have been fuses used for both HVAC AC units as well as used in demolition
They claimed they were empty and used to make a wall for privacy.
These same art students were arrested by NJ port authority in those vans with the plane and world trade center painted on them. They had their passports kept, bailed out and ordered to return to State of Israel. Later confirmed the 5 men were secret Intel mossad whatever as well as the man who owned the rental trucks. Dogs had reacted to explosive making material by NJ/NYC Port Auth
Also, FBI and Port Authority agents claimed that this very art group had visited their homes to sell their art pieces. You can't just get this info as it's protected data. How they got phone numbers and addresses I guess was a mystery. But several stated they got visited y the students or phone calls.
Shit that has been forgotten about over the years. So why keep investigating 20 years later. Because 5ye same data trail will lead to more corruption and future planned events.more people will die. -
2021-09-18 at 5:01 PM UTC
-
2021-09-18 at 5:03 PM UTC
Originally posted by Quick Mix Ready How did they rig them with thermate ?
If that's what was used.
People don't know this but the buildings were 3 buildings stacked on each other. Like 35-36 floors each. With 2 floors of maintaince rooms between each 3rd sections. So floor 37 and 38 would not be numbered where as floor 39 would be floor 37 on the next level. I don't know if my floors are correct in numbering but the elevators would start again and each section of thirds.
Floor 1, 37, 74 ( though I might he wrong with exact floor numbering) would have elevator transferring points. Only maintenance or service elevators went from garage basement all the way up to 110 and a attic of floor above 110.
The bottom third section had much larger I beams and cross members (H beams?) Then section two and section 3. Each section needed less steel for support.
So this is why the resistance should have been greater and greater while at the same time the load of office floors and all of the furnishings had blew out sideways far away from the structure throwing cross beams a football field length away destroying building 4,5 and 6. While building 7 was much farther
Why didn't the buildings slow and stop during the collapse. Kenetic energy was ruled out. So you can't use the runaway collapse theory.
I don't know how the buildings were rigged. Maybe high energy lasers cut through every few floors. Just enough to then pack them with thermate and explosives. But clearly Silverstein purchased an expensive fix not worth what he paid. It required shitloads of asbestos removal.
The people inside were literally vaporized and converted into steam under the intense heat of the thermate.
