2021-02-16 at 5:41 PM UTC
been working on this node i have three in the cup but nine are outside. What do I have to do to get the other nine inside so that my syntax directory works and I can SSH (secure snek hole) into the PPHL.
The following users say it would be alright if the author of this
post didn't die in a fire!
is a p2b pcp board the same as a breadboard and does it matter if I have my GPIO inside the node?
Good idea though. Gonna try and establish connection in a bit. I'll update the thread after
The following users say it would be alright if the author of this
post didn't die in a fire!
2021-02-16 at 7:24 PM UTC
pEEpEEpOOpOO knows a lot about this stuf. But i once had a client who wanted me to install a similar subset of PPHL but he needed the onboard mainfraim to be compatible with the new distributed ledger that ran on UPnP and was ready for plug and play. Well, you can imagine how that went. Of course i overclocked the server rack, like you normally would but this embedded device had a three pin double SATA Express port. Needless to say the PSU broke immediately. And i ended up having to change out the filesystem with a couple of CMOS and mosfet solutions.
The following users say it would be alright if the author of this
post didn't die in a fire!
2021-02-16 at 7:26 PM UTC
I've been wary of cloud computing ever since tbh.
2021-02-16 at 7:47 PM UTC
The following users say it would be alright if the author of this
post didn't die in a fire!
2021-02-17 at 12:20 AM UTC
Sudo
Black Hole
[my hereto riemannian peach]
I didn't understand 2 words of this thread until netstat posted. I haven't done shit on that side of computers for years.
2021-02-17 at 4:44 AM UTC
i know what you mean ive ran into this multiple times and it was almost always because there was an unshielded patch cable SOMEWHERE in the rack. of course one difficult time we couldnt figure it out in the first hour.. needless to say we had a witch hunt on our hands and by the end of the day we had bonded everything twice and driven two ground rods for every single patch panel in that closet but it turned out we just forgot to make sure the switch was actually plugged in
Nope. didn't understand one word of this. You're talking about a telnet patch node from circa 1980?
like a telnet thing with writing string commands?
2021-02-17 at 6:08 AM UTC
aldra
JIDF Controlled Opposition
The following users say it would be alright if the author of this
post didn't die in a fire!
