How to learn to cook meth Part 1 - The Shake and Bake.

1. 2020-11-17 at 8:28 AM UTC

   #141
   TroutinSpace Yung Blood
   Would like some more detailed stencil by step guide including the gassing step seems to be left out.
2. 2020-11-18 at 3:29 PM UTC

   #142
   

   Ghost Black Hole
   The only thing different with this and any other method is you make the bronze first because it's believed there is a more full reduction of PSE to amphetamine when done this way. I have done it on ground up pills myself and it's about the best you can get for minimal effort.
   
   Just make the bronze first its a good writeup, workup is the same as normal. It doesn't tell you how to gas it sort of assumes you already know how to do that part. The easiest way i know how is to use a plastic bottle with aluminum foil and hydrochloric acid and then you hook up a tube of fish tubing with a check valve so it doesn't suck back
   
   kinda like this but you keep the lid off and control the gas flow
   
   https://erowid.org/archive/rhodium/chemistry/hclgas.argox.html
   https://erowid.org/archive/rhodium/chemistry/hcl-gas.html
   https://erowid.org/archive/rhodium/chemistry/equipment/calcium.hcl.generator.html
   
   
   
3. 2020-12-03 at 2:13 AM UTC

   #143
   Meffedup Yung Blood
   So step 1 mix feet lye solvent together.
   Step 2 add LI to make bronze without blowing up.
   Step 3 add crushed up pills.
   Step 4 strain without blowing up.
   
   Step 5 gas the strained liquid.
   Step 6 strain again to get the desired product.
   
   ????
   
   Or am I missing or confused on something here.
4. 2021-03-07 at 4:16 AM UTC

   #144
   jessetovar420 Yung Blood [excrete my arguable empowerment]
   I’m using ephedra extract that’s not 100% clean. Idk how to clean to 100% but I’m guessing that my extract is 70% my my question is do you think the 30% of unknown contaminate would affect the hcl part of the stage? I having a hard time gassing because it gets sucked back into the Reaction bottle that generate the hcl. And is it possible to get hcl salt without gassing ? Like what if I used muriatic acid and just add drops?
5. 2021-03-07 at 8:04 AM UTC

   #145
   

   Ghost Black Hole

   Originally posted by jessetovar420 I’m using ephedra extract that’s not 100% clean. Idk how to clean to 100% but I’m guessing that my extract is 70% my my question is do you think the 30% of unknown contaminate would affect the hcl part of the stage? I having a hard time gassing because it gets sucked back into the Reaction bottle that generate the hcl. And is it possible to get hcl salt without gassing ? Like what if I used muriatic acid and just add drops?

   
   recrystalizew it and use a suckback check valve like from an aquarium or a real science one
6. 2021-03-09 at 4:25 PM UTC

   #146
   jessetovar420 Yung Blood [excrete my arguable empowerment]
   Ok I will get one .do you know what the most efficient and clean way to obtain pure pseudoephedrine from ephedra? I be using rubbing alcohol but it extracts a lot of chlorophyll and other stuff from plant . I think pseudoephedrine is a freebase when in plant so not sure if it water soluble. It is made into tea tho so maybe it is but wouldn’t heat destroy the alkaloids?
7. 2021-03-09 at 4:34 PM UTC

   #147
   jessetovar420 Yung Blood [excrete my arguable empowerment]
   I want to try this reaction phenylalanine to pheylniniol using sodium botohydride I found stuff on internet saying it would work but then from the alcohol I want to reduce methlyphenethlyamine or oxidize Ketone using potassium permaganye witch route is best you think?
8. 2021-03-09 at 4:42 PM UTC

   #148
   jessetovar420 Yung Blood [excrete my arguable empowerment]
   I seem to have make the achocol as the product smelled like an alcohol I put phenylalanine into a jar with distill water. Then I added sodium borohydire and mix and left in the sun to warm up . Then a half a day later I put isopropyl mixed with methanol into the reaction jar. I let us sit so an hour or so the I straind with coffee enhancement and then the cloudy liquid I used Coleman camp fuel to extract. When the water looke clearer and the Coleman fuel cloudy I separated the 2 liquid and set out to dry.I hoping it’s not gonna rain today but if it does then it will delay the dry time.
9. 2021-03-11 at 12:58 PM UTC

   #149
   kzs Yung Blood
   hi all.
   
   I am totaly new with shake and bake. I havent a succesfull syntesis yet. My problem is: I do ammonium-sulfate with lye and isopropyl alcohol (propanol), then put the lithium strip (energizer ultimate lithium AA), and put 1-2 capfull water. The reaction started very well boiling, the lithium strip starting to gone blue, later going to lightblue but the solvent always stay whiteish colour. My solvent colour never changed darkblue or grey nothing colour change. After while the whole lithium strip is solve in to the solvent nothing left from it.
   
   If anybody know somthing what cause the problem here pls reply..
   
   thanks
10. 2021-03-11 at 3:32 PM UTC

    #150
    

    Ghost Black Hole
    good liuck. blue is okay
11. 2021-03-12 at 5:38 PM UTC

    #151
    kzs Yung Blood

    Originally posted by Ghost good liuck. blue is okay

    
    You mean, the lithium strip surface change its colour to blue its ok? Not important if the solvent colour didnt change to blue and the lithium sometimes didnt turn to bronze?
    
    Tomorow I am doing a test with 2.5 gramm ephedrin hcl, 1 lithium strip will be ok or less?
    
    thanks for the reply
12. 2021-03-12 at 6:18 PM UTC

    #152
    

    Ghost Black Hole
    its not the most consistent reaction. yeah that sounds fine
13. 2021-03-12 at 7:06 PM UTC

    #153
    kzs Yung Blood

    Originally posted by Ghost its not the most consistent reaction. yeah that sounds fine

    
    Thank you
14. 2021-03-19 at 1:44 AM UTC

    #154
    jessetovar420 Yung Blood [excrete my arguable empowerment]
    Ok so I used a check back valve and now the liquid from the generator it be sucked into the sole vent . Also what is the reason every time I gas I don’t see 1 crystal form? I complet the reaction and have lost 6 pills boxes because I don’t know how to save the material after it’s been contaminated should I post pics
15. 2021-03-19 at 2:26 AM UTC

    #155
    

    Ghost Black Hole
    contaminated with what
16. 2021-03-19 at 10:27 PM UTC

    #156
    kzs Yung Blood
    
    
    
    
    The lithium reaction is finally done! I think its ok.
    
    Now I have problem with the Pse hcl pills those are very bad,, low yield. (cant clean them)
    No good pse pills here in this country...
    
    
    I tried before with ephedrine hcl powder (almost clean) but that time the lithium reaction wasnt complete (was cracked bottle, week pressure) no yield then.
    
    Ghost, my question is: ephedrine hcl it will work with shake and bake?? I did some research and some guys says at another forum it dosent work.
    
    (I dont know is it true or not)
    
    ephedrine hcl is my last chance..
    
    It will work? What do you think?
    
    Thanks
17. 2021-03-20 at 12:38 PM UTC

    #157
    

    Ghost Black Hole
    yes??? why are they saying it won't work i dont get it
18. 2021-03-28 at 3:16 AM UTC

    #158
    jessetovar420 Yung Blood [excrete my arguable empowerment]
    What is the best way to get solevent out of bottle when the still lithium floating on top ? I used too much lithium I think . I’m using real lithium metal not batteries.
19. 2021-03-28 at 4:27 AM UTC

    #159
    jessetovar420 Yung Blood [excrete my arguable empowerment]
    And doesn’t hcl+al —-> alcl + h2 ? Muriactic acid and aluminum make aluminum cliroide and hydrogen gas? How does it make hcl gas?
20. 2021-03-28 at 7:19 AM UTC

    #160
    

    Ghost Black Hole
    it just does idk why the fucking electrons and shit are more sexually attracted to the ones that make the gas it just works. It's magic but it's just the physics of the universe that you can salt a drug with a gas like whoa
    
    
    
    

    Originally posted by jessetovar420 What is the best way to get solevent out of bottle when the still lithium floating on top ? I used too much lithium I think . I’m using real lithium metal not batteries.

    
    suck the solvent out with the turkey baster or tape 5 of them to your hand like edward baster hands and squeeze your fist to suck 5 turkey baster worth of fluid and spill half of it on the floor