User Controls
There is a devils tone in our home
-
2020-12-02 at 1:12 AM UTCit's the Heater. sounds like an old boiler-room heating up. When the coil heats up it is starts to make a Horror Movie soundtrack-sound like, the scene in the start up of Chainsaw Massacre or I think I heard it in "Wrong Turn" as well. its a common sound track Devils Tone that makes your back and spine tingle. sounds almost dead-on that noise. like a Rarrr Reee tap tap tap sound.
I'm gonna record it for you guys and as a hiki soundtrack so he sticks to his promise of making us a song. If he doesn't, I will on my tiny synth board with half scale keys. not a toy however. the audio sound patches are profession and it has modular built in. -
2020-12-02 at 1:18 AM UTCPhillp Garrido kidnapped Jaycee Dugard in Meyers, then drove her to his home in Antioch. There, he enslaved her.
-
2020-12-02 at 1:22 AM UTC
-
2020-12-02 at 1:29 AM UTCSometimes the heat exchangers can get build ups that will cause all sorts of unwanted noise if not taken care of properly.
You can easily check by locating the heat exchanger and hitting is several times with a regular hammer.
You don't need to go bashing the fucking thing to pieces.
But it is metal so don't be afraid to hit it with some force.
Do that and let it run and see if it helped quiet it down.
All that buildup should have dislodged and it just gets blown outside. -
2020-12-02 at 1:59 AM UTC
Originally posted by BeeReBuddy Sometimes the heat exchangers can get build ups that will cause all sorts of unwanted noise if not taken care of properly.
ok.
You can easily check by locating the heat exchanger and hitting is several times with a regular hammer.
can i do it with an unusual hammer
You don't need to go bashing the fucking thing to pieces.
then what would be the fun in that?
But it is metal so don't be afraid to hit it with some force.
OK, Wait Metal? No, You should of stated this in the first line. that's even more scary than the Devils Tone. Devils tone and hitting Metal with a Regular hammer. Is that a regular Carpenter Hammer or a Regular Ball Peen or Regular Sledge Hammer or Regular Wood Mallet Hammer?
Do that and let it run and see if it helped quiet it down.
Do I have to catch up to it as it runs because I wont be able to tell if it quieted down or not
All that buildup should have dislodged and it just gets blown outside.
Outside? I'm in a condo. you sure it wont burn like lint and set the building on fire wedged between floors
Oh, OK. Thanks Fona -
2020-12-02 at 2:01 AM UTCBugz I do house exorcisms via remote/phone & video conference. I can give you the Jump Chat discount let me know sir.
-
2020-12-02 at 2:03 AM UTCAny hammer will do.
Don't smash it or it will be broken.
You only gotta hit it a dozen or 2 times.
After that it will work fine and no more hitting it.
It runs in place.
You don't have to keep up.
It has a connected to it and it goes outside. -
2020-12-02 at 2:09 AM UTCThe following users say it would be alright if the author of this post didn't die in a fire!
-
2020-12-02 at 2:13 AM UTC
Originally posted by BeeReBuddy Any hammer will do.
Don't smash it or it will be broken.
You only gotta hit it a dozen or 2 times.
After that it will work fine and no more hitting it.
It runs in place.
You don't have to keep up.
It has a connected to it and it goes outside.
I think it's actually porcelain not just metal.. this is why it smashes to pieces. or has some kind of heating tile in it. some kind of clay like tile. I will check some video tutorials online Youtube is a good source. -
2020-12-02 at 2:15 AM UTC
Originally posted by Bugz I think it's actually porcelain not just metal.. this is why it smashes to pieces. or has some kind of heating tile in it. some kind of clay like tile. I will check some video tutorials online Youtube is a good source.
No need to watch youtube videos.
just take it off and put it back on if nothing else.
It should fit loosely together.
Make sure the pipes and stuff didn't expand and get too snug.
It expands when in use but should be kinda loose when not in use. -
2020-12-02 at 2:20 AM UTC
Originally posted by BeeReBuddy No need to watch youtube videos.
just take it off and put it back on if nothing else.
It should fit loosely together.
Make sure the pipes and stuff didn't expand and get too snug.
It expands when in use but should be kinda loose when not in use.
Wait, You're the guy who couldn't figure out how to get a space heater to work properly and couldn't seal the windows right, by completely sealing yourself in with plastic and allowing carbon-monoxide to build up. Clearly this has to be Fona's girlfriend -
2020-12-02 at 2:27 AM UTC
-
2020-12-02 at 2:38 AM UTC
Originally posted by BeeReBuddy Fine whatever.
Use this.
https://www.amazon.com/aihihe-Blanket-Airplane-Compact-Microfiber/dp/B0831B9QTH/ref=sr_1_1?dchild=1&keywords=blanket&qid=1606875893&sr=8-1&th=1
Oh Sure. The old trick of 'the 0.01 cent item with a big ass Shipping and Processing fee to make up for the profit margin.' -
2020-12-02 at 2:41 AM UTCI love you man.
-
2020-12-02 at 2:42 AM UTC
-
2020-12-02 at 2:44 AM UTC
-
2020-12-02 at 3:10 AM UTC
Originally posted by BeeReBuddy Learn to park.
Fuck no. I can drive better than any human outside of professional racers on the freeways out here. But when it comes to parallel parking, I always get guys walking up saying "Can I help you park, Ma'am" and I get out of the car like "Fuck you. I'll see your tough ass at Sears Raceway this coming weekend, Faggot.
One little flaw in my driving skills. ONE! I find halfway up at a perpendicular park position halfway on the sidewalk is just as far away from the lanes as parallel parking is. -
2020-12-02 at 3:20 AM UTC
-
2020-12-02 at 3:22 AM UTCits the backing up part I have a problem with.
Plus, did you know backup cameras are standard in new cars these days? I'm used to looking over my shoulder -
2020-12-02 at 3:23 AM UTC
